I need Dyno maps

[scott will_imp]

i have the pcv w auto tune
replaced stock exhaust with motowerks gp, not cat and little baffling
the map i have had been trimmed about 9 times from the stock power commander map
i have a print screen

The numbers are percent deviation from stock tuning, right? What does trimming 9 times from stock mean? You changed the PCV map that came with the PCV for the stock bike 9 times?

I'm running the stock map on my PCV and have never pulled in a PC to mine.

The numbers are percent deviation from stock tuning, right? What does trimming 9 times from stock mean? You changed the PCV map that came with the PCV for the stock bike 9 times?

I'm running the stock map on my PCV and have never pulled in a PC to mine.
yes these values have been changed from the stock cb1100 map from power commander.
the auto tune has a variance adjustment of plus or minus 20%, you can accept the adjustment it makes after every ride and it changes the map.
this map i had had the bike out 9 times and adjusted everytime.
power commander paperwork says to lower the percent it can adjust once its dialed in and you dont see alot of variance.
i believe the target afm or mixture is 13.47, this number is close(been awhile since i looked at it so im not 100% sure) it shows on the laptop when the laptop its hooked to pcv and the bike is running.