![]() |
|
I need Dyno maps - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8) +--- Thread: I need Dyno maps (/showthread.php?tid=10393) Pages:
1
2
|
I need Dyno maps - CIP57_imp - 04-17-2014 Is there anyone who has added a PC5 on there stock or modified bike and has a dyno map?? I'm looking for A/F ratio. If you do please post our PM me. Let me know if the map is stock or modified. Thanks Steve RE: I need Dyno maps - scott will_imp - 04-17-2014 i have the pcv w auto tune replaced stock exhaust with motowerks gp, not cat and little baffling the map i have had been trimmed about 9 times from the stock power commander map i have a print screen RE: I need Dyno maps - Damfino_imp - 04-17-2014 RE: I need Dyno maps - lola_imp - 04-17-2014 ![]() (04-17-2014, 01:31 AM)CIP57_imp Wrote: Is there anyone who has added a PC5 on there stock or modified bike and has a dyno map?? I'm looking for A/F ratio. If you do please post our PM me. Let me know if the map is stock or modified. Steve, I'll post mine on here when I leave work. RE: I need Dyno maps - CB4ME_imp - 04-17-2014 (04-17-2014, 03:03 AM)scott will_imp Wrote: i have the pcv w auto tune The numbers are percent deviation from stock tuning, right? What does trimming 9 times from stock mean? You changed the PCV map that came with the PCV for the stock bike 9 times? I'm running the stock map on my PCV and have never pulled in a PC to mine. RE: I need Dyno maps - scott will_imp - 04-17-2014 (04-17-2014, 07:18 AM)CB4ME_imp Wrote:(04-17-2014, 03:03 AM)scott will_imp Wrote: i have the pcv w auto tune The numbers are percent deviation from stock tuning, right? What does trimming 9 times from stock mean? You changed the PCV map that came with the PCV for the stock bike 9 times? I'm running the stock map on my PCV and have never pulled in a PC to mine. yes these values have been changed from the stock cb1100 map from power commander. the auto tune has a variance adjustment of plus or minus 20%, you can accept the adjustment it makes after every ride and it changes the map. this map i had had the bike out 9 times and adjusted everytime. power commander paperwork says to lower the percent it can adjust once its dialed in and you dont see alot of variance. i believe the target afm or mixture is 13.47, this number is close(been awhile since i looked at it so im not 100% sure) it shows on the laptop when the laptop its hooked to pcv and the bike is running. RE: I need Dyno maps - CIP57_imp - 04-17-2014 ![]() I did LMAO RE: I need Dyno maps - HondaJon_imp - 04-17-2014 http://cb1100forum.com/forum/showthread.php?tid=1890&page=2&highlight=map+spreadshee I also have a few on hand, but our site will not allow me to attach file with a .PVM extension. You can get the TSR map here: http://shop.tsrjp.com/item/IS00008N00490.html Scott, I didn't add your map for two reasons; I anticipate the "autotune" will do just that every time you ride, so the map is perpetually changing on your bike. I need a .pvm file to work with. Much time needed to re-type map into excel.... Did you have a new bung welded onto you header? The autotune sensor, if memory recalls, is much larger than the stocker. RE: I need Dyno maps - Tortuga_imp - 04-17-2014 Whilst this was grossly unhelpful, immature and downright inflammatory, I absolutely love it!
RE: I need Dyno maps - the Ferret - 04-18-2014
|