The CB1100 Community Forum / Honda CB1100 Discussions / Accessories/Modifications v
Shorty pipe and center stand

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Shorty pipe and center stand
Author Message
Chuckk_imp Offline
Been There


Posts: 596
Threads: 19
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2018
RE: Shorty pipe and center stand
#27



(01-15-2019, 10:17 AM)peterbaron_imp Wrote:
(01-14-2019, 12:39 PM)Chuckk_imp Wrote: thank you guys, for the welcome.. I may try to send pics later..

THIS POST BELONGS TO CHUCKK, I just edit his pics, if any questions, address'em to Chuckk
Here he goes::

Here are some pics of center stand project..

[Image: 6bee2e177a78668592bc58dde2151dda.jpg]

[Image: 245697a2cb7378c26d0985abf2d84a41.jpg]
while I was at the muffler shop, I had the guy weld the nut to the center stand ..

[Image: 50190ca13171a822dd58331eb5a32fe8.jpg]

[Image: 8226041a984cfa179b22d98fd9e76a6b.jpg]
...a teflon pad attached to the swingarm

[Image: 9a93ae415f5c8e36721a6390297e08db.jpg]

[Image: 35866a2a17dc4bcfe2df3fdd3318db4a.jpg]
it was a little noisy so I replaced it with hard rubber.. I removed the magnet after finding out the additional weight caused a problem .. it over taxed the restoring spring..

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

[Image: 9fbf2d4c5faeb282ef4bdccfe5e2fc99.jpg]

[Image: 59bdd3e11c90dd718da2dcab2c7c3b69.jpg]
took the bike into the muffler shop to have the two short header extensions made to accommodate the emgo shorty reverse mufflers.. I have repacked the shorties already..

[Image: 8c6bff4c774308bf3bff1ec286ded312.jpg]

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Here is some other project::

[Image: 0e8f962641e4a8fff2aee7ca339d4df5.jpg]

[Image: 6a48fee6c7b47182e18b487a6e7463a4.jpg]

[Image: 8bf993d3189ff06b31675f80d182b94e.jpg]

[Image: b1a81d564bdf8187345257b126f1407f.jpg]


>>>>>>>>>>>>>>
<<<<<<<<<<<<<<

Chuckk >> please excuse any errors...

THIS POST BELONGS TO CHUCKK, I just edit his pics, if any questions, address'em to Chuckk
Here he goes::

Here are some pics of center stand project..

[Image: 24fa8a1de1b17ef0306b4b916f6e9179.jpg]

[Image: 587d1f60e229786c8d4933be6cc75199.jpg]
while I was at the muffler shop, I had the guy weld the nut to the center stand ..

[Image: 9c77cfb67203c16aa366ba19dc033a95.jpg]

[Image: da8fbefac5f215153cb6bf3b60926fc4.jpg]
...a teflon pad attached to the swingarm

[Image: 3365c95a7d9a5f2424183e8b71baf2dc.jpg]

[Image: 3c5c6791fad7e705ad547ed198fea55b.jpg]
it was a little noisy so I replaced it with hard rubber.. I removed the magnet after finding out the additional weight caused a problem .. it over taxed the restoring spring..

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

[Image: c50888fc2ef7a61113ea372b3cd455ea.jpg]

[Image: e50e8b7a3dac0cf0ee2d3d72868619e2.jpg]
took the bike into the muffler shop to have the two short header extensions made to accommodate the emgo shorty reverse mufflers.. I have repacked the shorties already..

[Image: c8c9f5d32f8e55faae5896976c0d8c69.jpg]

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Here is some other project::

[Image: bd6543a9789f8b76ee0662d73f5074cf.jpg]

[Image: 93edb9eec78c424773fb95a60e5b4c9f.jpg]

[Image: e32d1ae5b90f19a352770d7d0a6550c3.jpg]

>>>>>>>>>>>>>>
<<<<<<<<<<<<<<

Chuckk >> please excuse any errors...
Cool
thanks Peter for all of your help posting the pics.. chuck j.


01-15-2019, 11:03 AM
Find Reply


Messages In This Thread
Shorty pipe and center stand - by domeular_imp - 01-07-2019, 11:24 PM
RE: Shorty pipe and center stand - by Cormanus - 01-08-2019, 06:01 AM
RE: Shorty pipe and center stand - by Cormanus - 01-08-2019, 03:39 PM
RE: Shorty pipe and center stand - by Frulk_imp - 01-09-2019, 11:06 AM
RE: Shorty pipe and center stand - by Frulk_imp - 01-09-2019, 12:36 PM
RE: Shorty pipe and center stand - by Cormanus - 01-14-2019, 05:17 AM
RE: Shorty pipe and center stand - by Chuckk_imp - 01-15-2019, 11:03 AM
RE: Shorty pipe and center stand - by Cormanus - 08-31-2019, 07:03 AM
Shorty pipe and center stand - by Cormanus - 10-22-2019, 04:40 AM
RE: Shorty pipe and center stand - by Frulk_imp - 10-22-2019, 05:43 AM
RE: Shorty pipe and center stand - by Frulk_imp - 10-22-2019, 05:51 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Stand-alone ECU TTRacer_imp 2 333 02-22-2024, 01:58 PM
Last Post: TTRacer_imp
  Advice - carry water bottle and side stand plate? 4 Paws_imp 41 2,738 07-23-2022, 06:02 PM
Last Post: rich_imp
  Moriwaki 4 into 1 full pipe GS1100_imp 9 761 01-30-2022, 12:59 PM
Last Post: rich_imp
  Yoshimura RS3 Install. 2013 Kit on a 2014 and sorted the center stand issue! rdtshaw_imp 17 1,377 01-05-2022, 10:54 PM
Last Post: Nibis_imp
  Pit Bull Rear Stand Stichill 7 663 05-02-2021, 04:45 AM
Last Post: ampm7_imp
  Spools for pit stand. kmoney_imp 12 1,492 03-25-2021, 12:09 PM
Last Post: Obleo
  Intalled DCC 12" Stainless Steel reverse shorty exhaust Garver_imp 10 972 10-13-2020, 03:00 AM
Last Post: Garver_imp
  Dimotiv Side Stand Enlarger - 2017 EX fit TXBikerGuy 5 657 08-08-2020, 09:48 AM
Last Post: TXBikerGuy
  side stand foot for 2017 Houtman_imp 7 670 09-17-2019, 08:13 AM
Last Post: Houtman_imp
  Center stand mod for Yoshimura system Razor 9 798 09-06-2019, 05:20 AM
Last Post: Nemo_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | CB1100 Forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication