(01-14-2019, 12:39 PM)Chuckk_imp Wrote: thank you guys, for the welcome.. I may try to send pics later..
THIS POST BELONGS TO CHUCKK, I just edit his pics, if any questions, address'em to Chuckk
Here he goes::
Here are some pics of center stand project..
![[Image: 245697a2cb7378c26d0985abf2d84a41.jpg]](https://cb1100forum.net/forum/uploads/imp/201901/245697a2cb7378c26d0985abf2d84a41.jpg)
while I was at the muffler shop, I had the guy weld the nut to the center stand ..
![[Image: 8226041a984cfa179b22d98fd9e76a6b.jpg]](https://cb1100forum.net/forum/uploads/imp/201901/8226041a984cfa179b22d98fd9e76a6b.jpg)
...a teflon pad attached to the swingarm
![[Image: 35866a2a17dc4bcfe2df3fdd3318db4a.jpg]](https://cb1100forum.net/forum/uploads/imp/201901/35866a2a17dc4bcfe2df3fdd3318db4a.jpg)
it was a little noisy so I replaced it with hard rubber.. I removed the magnet after finding out the additional weight caused a problem .. it over taxed the restoring spring..
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
![[Image: 59bdd3e11c90dd718da2dcab2c7c3b69.jpg]](https://cb1100forum.net/forum/uploads/imp/201901/59bdd3e11c90dd718da2dcab2c7c3b69.jpg)
took the bike into the muffler shop to have the two short header extensions made to accommodate the emgo shorty reverse mufflers.. I have repacked the shorties already..
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Here is some other project::
>>>>>>>>>>>>>>
<<<<<<<<<<<<<<
Chuckk >> please excuse any errors...