Help! Dynojet PC V Install Not Going Well, 2014 CB

[Chuckk_imp]

I know what you mean about that fuel disconnect.. I will stay away from doing that again for as long as I can.. here is a pic of my 2017 quick disconnect and how I re-installed it.. yours may be different.. but make sure you do it right.. there was a posting of one coming loose after it was re-installed..gas all over !! .. mine has 2 plastic clips that hold the connector on.. I used a plastic wire tie, folded over to "jam" if you will, onto the top of one of the plastic clips.. the plastic clip cannot yield and allow the connector to come apart unless that wire tie is removed first.. I'm not sure as to how cheap a new connector would be, referring to the parts you are supposed to replace on your 2014..
.