07-26-2013, 02:38 PM
(07-26-2013, 02:44 AM)The ferret_imp Wrote:(07-26-2013, 01:06 AM)Randy B_imp Wrote:(07-25-2013, 11:46 PM)The ferret_imp Wrote: Check 2 things, throttle play and chain adjustment. Throttle play should be 2 to 4 mm or 1/4" I think and chain 1" to 1 1/4" from pin center pulled down to pin center pushed up. Also try not to "chop" the throttle, practice rolling it on and off.
It's actually 1" to 1.4". I've seen the 1¼" thrown around a couple times, but it's actually 1.4".
It's actually 1" to 1.4". I've seen the 1¼" thrown around a couple times, but it's actually 1.4".
Randy.. The owners manual says 1- 1.4 the decal on the swingarm says simply 1 1/4 " its not critical as long as it doesn't exceed 2" or go below 1". I've found it to shift a little better when adjusted to 1 1/4 or less.
It's actually 1" to 1.4". I've seen the 1¼" thrown around a couple times, but it's actually 1.4".
Randy.. The owners manual says 1- 1.4 the decal on the swingarm says simply 1 1/4 " its not critical as long as it doesn't exceed 2" or go below 1". I've found it to shift a little better when adjusted to 1 1/4 or less.
Interesting. I didn't actually read the swingarm. I guess I'll have to take a closer look at that the next time I check the chain.