Removing and reinstalling rear wheel

[rboe]

I tried a couple ways to assemble the rear wheel. A: getting the chain around the sprocket then trying to get the caliper installed. B: installing the caliper then trying to get the chain around the sprocket. When installing the chain it will be either from the top or bottom of the sprocket which means one length of it needs to slide on the outside of the sprocket to get it installed on the opposite side of the sprocket (the top or bottom). This action of either dropping the chain down the side or trying to work it up did not succeed because the gap was too narrow. Kept getting blocked by one or more sprocket bolts and the swing arm.