Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Smooth Power Everywhere II
#18
(04-05-2014, 07:42 AM)CB4ME_imp Wrote: I didn't want to hijack Vic's great thread so I started another.

I also added a PCV to my bike.

I'm running the stock MAP on the Power Commander. No auto tune.

Idle is 1100 rpm. Just like Vic's bike, no hesitation, no jerky response, smooth accel from low revs right up to redline. And the bike has had a few performance mods - TSR air funnel, K&N filter, MotoGear headers and Staintune. Pretty darn amazing.

The only thing different I've noticed, besides wrist bending performance when the throttle is exercised, is an occasional single mild pop between gears when upshifting at a leisurely pace. Any idea what's causes this - besides the fact that the PCV is running a stock MAP? Lean, rich?

Other than that, it's the same well mannered power plant, comfortable cruising around at 2500 rpm in 5th gear with plenty of power going up hills.

[Image: 24d38e41a50c4112bf5972e585027299.jpg]

Hi CB4ME, great-looking bike! I'm waiting to accept delivery on my 2014 Deluxe, but I would like to ask you about your fairing, and luggage-rack / sissy bar because these are two options I intend to install on my bike. What brand of fairing is this? Is that a Honda rack that you modified by attaching the sissy bar to like was shown in a different thread in this forum? Do you have the sissy bar because of a passenger? If yes, can you please comment on your passenger's comfort while riding with you? Thank you.
Reply


Messages In This Thread
Smooth Power Everywhere II - by CB4ME_imp - 04-05-2014, 07:42 AM
RE: Smooth Power Everywhere II - by Dakota_imp - 04-05-2014, 09:42 AM
RE: Smooth Power Everywhere II - by CB4ME_imp - 04-05-2014, 12:39 PM
RE: Smooth Power Everywhere II - by CB4ME_imp - 04-05-2014, 11:48 PM
RE: Smooth Power Everywhere II - by gary_imp - 04-06-2014, 02:08 AM
RE: Smooth Power Everywhere II - by CB4ME_imp - 04-06-2014, 07:28 AM
Smooth Power Everywhere II - by Elipten_imp - 04-06-2014, 10:31 AM
RE: Smooth Power Everywhere II - by CB4ME_imp - 04-09-2014, 03:59 AM
RE: Smooth Power Everywhere II - by the Ferret - 04-09-2014, 08:18 AM
RE: Smooth Power Everywhere II - by Dave_imp - 04-10-2014, 10:42 AM
RE: Smooth Power Everywhere II - by CB4ME_imp - 04-10-2014, 09:56 PM
RE: Smooth Power Everywhere II - by Tortuga_imp - 04-18-2014, 10:31 AM
RE: Smooth Power Everywhere II - by Dave_imp - 04-19-2014, 02:55 AM
RE: Smooth Power Everywhere II - by CB4ME_imp - 04-19-2014, 06:38 AM
RE: Smooth Power Everywhere II - by Greg_imp - 04-30-2014, 11:59 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  GPS power cable The Gecko_imp 10 1,037 10-06-2023, 12:40 AM
Last Post: suhawk305
  Has anyone installed a power commander in? Doug Shepard_imp 3 505 08-10-2023, 07:20 AM
Last Post: Doug Shepard_imp
  Power source for oil indicator led norton1974_imp 1 278 12-31-2022, 10:07 AM
Last Post: Cormanus
  Power Commander V question HBFL_imp 1 261 08-23-2022, 05:41 PM
Last Post: jtopiso_imp
  Power Commander Tune Maps. mvk24_imp 43 3,088 01-03-2022, 08:16 AM
Last Post: SoCal CB1100_imp
  2010 model Power Commander alternative? 83NZA_imp 7 625 08-03-2021, 02:04 PM
Last Post: Aussieflyer
  Smooth shifting DougsZ28_imp 16 1,386 07-09-2021, 07:32 AM
Last Post: GoldOxide_imp
  Transmission power routing and speeds LakeWylieJoe_imp 6 642 01-10-2021, 10:30 AM
Last Post: jimgl3_imp
  Guhl Reflash vs. power commander with custom map. misterprofessionality 9 762 09-06-2020, 03:59 AM
Last Post: PowerDubs_imp
  Cheap airflow / power gains PowerDubs_imp 7 618 07-21-2020, 01:59 AM
Last Post: Cobalt23_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)