Adjusting clutch friction point

[tintoy_imp]

I feel like I'm getting a bit of clutch drag when the bike is warm, most noticeable between first and second. My clutch engages very close to the handlebar and I would like to move it out to the center of the lever movement but I don't know where the adjustment screw is. There seems only to be the large adjustment point down by the transmission. HAAAAAALP!

Thanks
Randall

There is one thing you can check.

You'll notice the hand lever and the part that actually pushes on the master cylinder piston are separate. If the part that pushes the piston is not allowing the piston to return fully then it is possible for the piston to "bleed down" to a lower level.

If this is happening perhaps just a drop of oil on the pivot may solve your problem.

This can also happen to people that constantly have their hand slightly pulling on the clutch lever not letting it return completely.

Also, make sure the fluid level is high enough.