12-19-2014, 02:01 AM
I am awaiting my service manual. I have read on this forum that the axel bolt and nut required a 27mm and 32 mm. That is not what I have on my 2014 CB 1100 Deluxe. The bolt head on left is 22 mm and the nut on right is 27mm or SAE 1 1/16th inch. I did do the chain adjustment which was needed due to chain slack at 601 miles and first service. Was difinitly getting chain clunking on acceleration. Does anyone have the correct Honda torque spec for the rear axel nut on the 2014 Honda CB 1100 Deluxe model. I believe someone had posted 68 ft. lbs. but not for sure its for the 2014 C1100 Deluxe. Seems there must be a least 2 differant axels for these CB 1100. Any help is appreciated.