07-17-2016, 09:47 AM
Help ... I seem to have done something wrong because when trying to tap into the unused heated grip connector in the headlight cluster. I Ordered the male connector and SAE 2 prong wire harness from Eastern Beaver. Connected wiring harness to male connector and plugged into the heated grip female connector. Started engine and checked SAE end with multi-meter and NOTHING registered. Disconnected male connector and checked original female heated grip connector, but still nothing registers on the multi-meter. I've been looking thru the 2013-2014 Service Manual, but really don't know what I am looking at. Any suggestions?
ALL OK NOW. Realized that I blew the 10A Meter Illumination fuse. Replaced that and all ok now. Think it may have crossed electrodes on the first multi-meter I was using (big bulky complicated thing) ... the hint was that I thought I saw a small arc/spark. Replaced fuse and switched to my neighbors palm size meter which is easier to handle.
ALL OK NOW. Realized that I blew the 10A Meter Illumination fuse. Replaced that and all ok now. Think it may have crossed electrodes on the first multi-meter I was using (big bulky complicated thing) ... the hint was that I thought I saw a small arc/spark. Replaced fuse and switched to my neighbors palm size meter which is easier to handle.