11-15-2017, 12:53 PM
Ferret, it's quealing either motor on or off. I have lubricated the pivot with Liqui chain lub.
Thanks for the info, i'll try it out on weekend.
Thanks for the info, i'll try it out on weekend.
(11-15-2017, 12:54 AM)The ferret_imp Wrote: WD 40 is a short term fix for pivot squeal. Long term fix is to pull the blade, and pin, clean off the old stuff, apply a good quality grease like bearing grease and reassemble.
pics are gone but process is explained
http://www.cb1100forum.com/forum/showthr...p?tid=6755
