12-08-2017, 01:51 PM
Peter
Thanks for your post. Our intention was to post separately for each sensor, with expanded details/instructions...after popgun has a chance to research data not included in the factory service manual.
More on Throttle Position sensor from FSM page 5-11:
+ black/yellow has a junction to the MAP sensor. From that junction the wire is yellow/red to ECM A9
signal black/red to junction, then red/yellow to ECM B17
- black/green to junction common with the 6 sensors, then green/orange to ECM A18
ECM 33P black connector for A positions, 3 rows, 1-11, 12-22, 24-33
ECM 33P gray connector for B positions, 3 rows, 1-11, 12-22, 24-33
Thanks for your post. Our intention was to post separately for each sensor, with expanded details/instructions...after popgun has a chance to research data not included in the factory service manual.
More on Throttle Position sensor from FSM page 5-11:
+ black/yellow has a junction to the MAP sensor. From that junction the wire is yellow/red to ECM A9
signal black/red to junction, then red/yellow to ECM B17
- black/green to junction common with the 6 sensors, then green/orange to ECM A18
ECM 33P black connector for A positions, 3 rows, 1-11, 12-22, 24-33
ECM 33P gray connector for B positions, 3 rows, 1-11, 12-22, 24-33