04-06-2018, 02:43 AM
I too have a 30 inch inseam and the stock height wasn't bad unless there was gravel under foot when stopped/stopping. I lowered my 14 Std by installing 335mm shocks and raising the forks 7/8ths inch in the trees. The bike has the proper rake and trail and handles better than when I had only lowered the rear. If you use a lower seat you might cramp your leg room. I have a Corbin Gunfighter and Lady and my knees are slightly more bent.
Forgot to add that I had to shorten the side stand after lowering. I cut out 3/4 inch under the return spring hook and welded the foot back on. Restored the original lean and now I can walk away comfortably, without worry.
Forgot to add that I had to shorten the side stand after lowering. I cut out 3/4 inch under the return spring hook and welded the foot back on. Restored the original lean and now I can walk away comfortably, without worry.