11-23-2013, 12:09 PM
(11-23-2013, 06:03 AM)lola_imp Wrote:(11-23-2013, 05:37 AM)cbfan_imp Wrote: Clean all the areas where oil residue is showing, clean it good. Check torque on all hardware close to the areas. Ride it in your normal fashion, check for leakage after every ride (try and catch it when it first leaks to see point of origin).............the rate at which it leaks will determine what kind of action you should take.
Good luck.
this is a good suggestion. But instead of Riding it I would advice not to.
Clean the engine with degreaser in all areas where there are signs of leaking then when everything on the engine is dry Start the engine and let it idle. Most likely you will see where the leaks are coming from. If you need help with any torque values or diagrams send me a message and I will email you whatever information you need.
goodluck
this is a good suggestion. But instead of Riding it I would advice not to.
Clean the engine with degreaser in all areas where there are signs of leaking then when everything on the engine is dry Start the engine and let it idle. Most likely you will see where the leaks are coming from. If you need help with any torque values or diagrams send me a message and I will email you whatever information you need.
goodluck
Yeah.First wipe off all stained areas with rubbing alcohol.
Q-tips could be used.
Then start the engine and let it run for about 5 minutes and check.
If nothing then ride for awhile and check.
Kinda the Grandma approach.There's a reason Grandma live
long lives.