09-28-2019, 06:16 AM
Last year I bought a H4 LED replacement from a respectable company in Florida. I bought the H4 R4 but when I could not get it into the bucket I put it in my wife's CRV. For my 2013 and 2014 I than bought the H4 Native from the same company.
Today I took my 2014 on the BRP and when I came into the first long and "bendy " tunnel I realized that BOTH the low and high beam were not working , I nearly soiled my clean pants !
I retuned home and the fuse for the head light was burned out , put an other one in and as soon as I switch the bike on that fuse went as well.
When I put the original H 4 back in everything was ok.
I put the LED in at the end of December 2018 and it had only 1695 miles on the bulb.
Tomorrow I will remove the LED from my 2013 and will contact the seller.
BE WARNED THAT SUDDENLY YOU COULD LOSE BOTH BEAMS AT THE SAME TIME WITH THE H4 NATIVE LED REPLACEMENT BULB.
For those interested the company was ADVMONSTER, this is a very respectable seller and I will send them the bulb which smells a little burned.
Today I took my 2014 on the BRP and when I came into the first long and "bendy " tunnel I realized that BOTH the low and high beam were not working , I nearly soiled my clean pants !
I retuned home and the fuse for the head light was burned out , put an other one in and as soon as I switch the bike on that fuse went as well.
When I put the original H 4 back in everything was ok.
I put the LED in at the end of December 2018 and it had only 1695 miles on the bulb.
Tomorrow I will remove the LED from my 2013 and will contact the seller.
BE WARNED THAT SUDDENLY YOU COULD LOSE BOTH BEAMS AT THE SAME TIME WITH THE H4 NATIVE LED REPLACEMENT BULB.
For those interested the company was ADVMONSTER, this is a very respectable seller and I will send them the bulb which smells a little burned.