Steel Rear Sprockets

[IndianRider_imp]

DBM's 2014 is a 6-speed. My 2013 5-speed used to do 4000 rpm at 70 mph, the 19T front dropping it to about 3775, and adding a 37 tooth rear dropped it to 3600 rpm.

Sounds about right. I’m between 3500-3600 rpm at 70mph with the 19 front and 37 rear


Sent from my iPhone using Tapatalk

I R : I was curious about the noise without the rubber ( bushing) . Would like others to chime in .

On the dirt bike you can tell a very minor noise difference due to the lower speeds at 25-30mph and dirt helmet but no vibrations .. I doubt you can hear the noise difference on the CB at higher speeds with a full face helmet ..


Sent from my iPhone using Tapatalk