Posts: 204
Threads: 20
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2013
Well the new fork seals have made no difference. In fact it seems to be leaking more oil now. I'll have to bite the bullet and have the legs hardchromed. I'm going to blame that swarm of grasshoppers I ran into just before they started to leak. Whatever they have inside them must be corrosive plus the fact that Honda must have waved the forks past the chrome bath as the coating is ultra thin as evidenced by the small amount of rust spots appearing between the upper and lower triple clamps. My Z1 Kawasaki has 40 year old forks on it and I have just replaced the seals as a precaution after 65000 miles......no leaks.
Also found that one of my horns stopped working at about the same time. Dang grasshoppers. Even my jacket was plastered with yellow crap from them.
Posts: 16,322
Threads: 348
Likes Received: 876 in 479 posts
Likes Given: 1,010
Joined: Apr 2025
Yet another reminder that, beautiful though they are, the build quality of the CB1100 leaves more than a little to be desired.
Posts: 8,045
Threads: 21
Likes Received: 197 in 117 posts
Likes Given: 142
Joined: Apr 2025
Tezza, look at this parts diagram please:
http://www.partsfish.com/oemparts/a/hon/...front-fork
They did change item 19 right? not just item 25? Any chance they just buggered up the new seals? I had that happen once and had to redo them myself.
Posts: 204
Threads: 20
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2013
Checked the seal dimensions on the old seals...they were the same as the new ones. You can see in the photo where the dust seal and the oil seal rest on the chrome. It has corroded away.
[url=http://s1200.photobucket.com/user/neilsot/media/IMG_02931_zpsszw6bfzi.jpg.html]
![[Image: 7a1eaeb4985d89c5d674097418fc6124.jpg]](https://cb1100forum.net/forum/uploads/imp/201510/7a1eaeb4985d89c5d674097418fc6124.jpg)
Posts: 204
Threads: 20
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2013
Dropped off the fork tubes today. They will come back with a 7 micron layer of chrome instead of the 3 microns they currently have.
Posts: 1,746
Threads: 13
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2013
I am disappointed in Honda quality an some parts.
2014 CB1100 DLX
2013 CB1100 Std
1990 BMW K75 RT
Posts: 915
Threads: 66
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2014
Plenty of good aftermarket seals out there.
Posts: 361
Threads: 4
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2013
Anyone else replace these yet? The work involved is nothing crazy, but I'm wondering if others have gone with OEM parts, or aftermarket products.
Posts: 7,103
Threads: 94
Likes Received: 593 in 324 posts
Likes Given: 996
Joined: Apr 2025
Dust boots are cracking = need replacement as well, while doing seals.
Do it right or don't do it at all.
Pics upon compilation
Posts: 23,490
Threads: 697
Likes Received: 613 in 275 posts
Likes Given: 788
Joined: Apr 2025
I don't see any fork seal leak, just the dust boot dry cracking. If it were me I'd skip it until winter and ride.
