Posts: 402
Threads: 50
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2014
Twice now, I have snapped bolts when my torque wrench didn't "click" at the set weight. This is with two different torque wrenches. (I suppose I could have made a mistake in the setting, but I don't think so.) Anybody every have this happen to them?
I no longer trust that type of torque wrench! I am going to go back to the old style with the needle. At least with it you can see where you are in a continuum on the torque scale.
What's annoying is in both these cases I could have just gone by feel and been just fine.
Posts: 23,436
Threads: 697
Likes Received: 516 in 237 posts
Likes Given: 683
Joined: Apr 2025
No, I haven't but fear it could happen, although I mostly use it for torquing the rear axle nut and doubt I'd ever snap that baby off.
Posts: 402
Threads: 50
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2014
Yeah, after I posted I did a google search on something like this happening and found some hits. I would never trust this type torque wrench again.
Posts: 2,635
Threads: 125
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Jun 2016
Always store that style of wrench with the tension off the spring (loosen all the way).
The smaller the wrench, the less 'click' they tend to make. You must keep an eye on them and watch and feel for the movement.
I'm not a fan of the old school needle bar- too much leeway.
If I used a tq wrench more often on critical stuff (engine internals) I would go in the other direction and get a good digital one.
Posts: 864
Threads: 39
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jul 2016
I have a nice one but generally just go by feel. experience on what diameter the bolt , type of metal and amount of stress the part may take has allowed me to never over tighten or anything come loose. have used Lock tight on my Harley's but that problem has been solved ..........
Posts: 279
Threads: 16
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2018
I use my elbow as a torque wrench. Never snapped a bolt, and never had a leak.
Posts: 7,020
Threads: 94
Likes Received: 497 in 273 posts
Likes Given: 900
Joined: Apr 2025
(08-10-2018, 04:49 AM)postoak_imp Wrote: Twice now, I have snapped bolts when my torque wrench didn't "click" at the set weight. This is with two different torque wrenches. (I suppose I could have made a mistake in the setting, but I don't think so.) Anybody every have this happen to them?
I no longer trust that type of torque wrench! I am going to go back to the old style with the needle. At least with it you can see where you are in a continuum on the torque scale.
What's annoying is in both these cases I could have just gone by feel and been just fine.
Q1.
How did you approach torquing...did you try to torque nut/bolt that was already tight/torqued or first you cracked it loose...was your bolt/nut lubed or dry and of what size and length??...it matters
Q2 What was your TW set at?
Hope you are not talking about angle torque and your wrench was set OK and in good working condition (always store TW in rest position)
The old style with needle, explains for itself
Posts: 2,635
Threads: 125
Likes Received: 1 in 1 posts
Likes Given: 0
Joined: Jun 2016
(08-10-2018, 07:59 AM)DBM_imp Wrote: I use my elbow as a torque wrench. Never snapped a bolt, and never had a leak.
Hope you’ve never worked on engine internals, bearing clearances, etc.
Tq specs aren’t just for keeping bolts from falling out or snapping.
Sent from my iPhone using Tapatalk
Posts: 402
Threads: 50
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Feb 2014
Yeah, I know to keep the wrench stored at zero, but admit I forgot this time -- maybe that did it. As for the smaller one, at the time I thought to myself that I had already tightened the nut past the the small value required, and maybe I did, but I doubt it.
The older needle type may not be as accurate, but at least you won't go way past the value called for waiting for a click.
As for the oil, I am usually just putting back on a bolt or nut I have previously removed with no additional oil added.
Posts: 7,020
Threads: 94
Likes Received: 497 in 273 posts
Likes Given: 900
Joined: Apr 2025
(08-10-2018, 08:40 AM)PowerDubs_imp Wrote: (08-10-2018, 07:59 AM)DBM_imp Wrote: I use my elbow as a torque wrench. Never snapped a bolt, and never had a leak.
Hope you’ve never worked on engine internals, bearing clearances, etc.
Tq specs aren’t just for keeping bolts from falling out or snapping.
Sent from my iPhone using Tapatalk
Hope you’ve never worked on engine internals, bearing clearances, etc.
Tq specs aren’t just for keeping bolts from falling out or snapping.
DBM I use my elbow as a torque wrench. Never snapped a bolt, and never had a leak =
...don't get upset...we ekil your elbow torque..lol...
and see below why:
PD Hope you’ve never worked on engine internals, bearing clearances,... = +1
