Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dyno'ed the stock bike today
#11
No, not really, just unplug black wire from speed sensor
on rear caliper and it is disconnected. So is speedo/odo.
Reply
#12
Look at the wiring diagram. There are 2 voltage wires direct from the rear speed sensor to the Speedo. Then there is 1 speed wire coming out of the cluster and straight to the ecu. I don't know if the ecu needs to know road speed for its fuel maps or if it would cause a code if it were disconnected. That wire could be the key to it but I'm not willing to take stuff apart enough to find out.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Stock Cylinders dave 5 624 10-14-2025, 10:41 AM
Last Post: pekingduck
  How much do stock pistons weigh? jikemenkins 4 457 04-28-2025, 10:06 PM
Last Post: Whoops
  Dyno jet auto tune sethrose_imp 11 599 10-06-2022, 09:40 AM
Last Post: STLTHMSTA_imp
  Stock handlebar measurements misterprofessionality 5 369 04-12-2022, 05:47 AM
Last Post: pekingduck
  Stock Suspension Adjustment riggies_imp 28 1,417 10-16-2019, 02:08 PM
Last Post: jdvalero_imp
  Handlebars - Back to Stock ishouldbuyatacotruck_imp 17 1,209 08-22-2019, 06:44 AM
Last Post: ishouldbuyatacotruck_imp
  Bike stalled today... ryanschillinger_imp 26 1,023 02-11-2019, 10:01 PM
Last Post: GoldOxide_imp
  stock tool kit (if you can call it that) 12cb96vfr_imp 11 591 02-09-2019, 02:28 AM
Last Post: GoldOxide_imp
  Bike Shut Off While Riding Today Johnny62087_imp 16 661 09-20-2018, 03:07 PM
Last Post: DBM_imp
  Stock header weight PowerDubs_imp 6 352 08-25-2018, 09:56 AM
Last Post: the Ferret

Forum Jump:


Users browsing this thread: 1 Guest(s)