+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Dyno'ed the stock bike today (/showthread.php?tid=6227)
Pages:
1
2
Dyno'ed the stock bike today - hondahoarder_imp - 06-22-2013
Local dealer had a Dyno set up for an Open House. So had an opportunity to see what the stock bike looked like. For sure a Torque bike! Flat as can be...
[url=http://s413.photobucket.com/user/Mstarvideo/media/2013%20CB1100/2013CB1100dyno001_zpsc54a0db0.jpg.html]
RE: Dyno'ed the stock bike today - the Ferret - 06-22-2013
Funny how different dynos and different results on similar motorcycles.
But yours is putting down aprox 80 at the rear wheel and that aint bad. Guess you dont have to worry about running it to redline now, huh?
RE: Dyno'ed the stock bike today - HikerToo_imp - 06-22-2013
Cool, did you get it on video?
RE: Dyno'ed the stock bike today - Deanohh_imp - 06-22-2013
Do you know what gear they ran it in? Must have hit the speed limiter before it got past 7500 rpm.
RE: Dyno'ed the stock bike today - hondahoarder_imp - 06-22-2013
(06-22-2013, 07:04 AM)Deanohh_imp Wrote: Do you know what gear they ran it in? Must have hit the speed limiter before it got past 7500 rpm.
5th gear I think?? Remember boys I am a rider/collector not very techie and average wrench so that is about as technical as I can get.
Someone ask for the video.
Ask and ye shall recieve, Here ya go, just threw this together from some cell phone video. (link Below)
BTW Can you embed video in a message here?
PS: I misspoke just looked at the curve and read 80, watching this it was 79.75 HP.
RE: Dyno'ed the stock bike today - wildezt_imp - 06-22-2013
Thanks for sharing HH
RE: Dyno'ed the stock bike today - the Ferret - 06-22-2013
Ill be darned one gear, no shifting, just run it up and pull in the clutch and let it slow down. Interesting. Thanks for posting.
RE: Dyno'ed the stock bike today - SUPERCRUZ_imp - 06-25-2013
Hondahoarder - Looks like you have access to a pretty nice shop. Maybe you could ask the tech what is involved in removing the factory speed limiter. My bet is accessing the PCM with some tuning software and simply turning the limiter off or adjusting the limiter up to a higher speed. Would be interested to know what your guy has to say on the subject as others have asked in another thread.
RE: Dyno'ed the stock bike today - hondahoarder_imp - 06-25-2013
See this thread http://cb1100forum.com/forum/showthread.php?tid=605
RE: Dyno'ed the stock bike today - SUPERCRUZ_imp - 06-26-2013
Thanks. Saw this post shortly after I posted. Sounds pretty difficult to get around the speed limiter.