Correct part number for front brake pads

[Frulk_imp]

Anybody have the OEM part number handy for front brake pads on a non-abs 2013 ? I’m at the dealership and running into issues.

 

[Frulk_imp]

No need for number. Once again I made a 40 mile round trip and came home with the wrong pads. I believe I had the parts tech order the correct ones this time.

 

[Lord Popgun]

Frulk,

Here is the non-abs 2013 fiche for the front brakes. Item 3 https://www.partsfish.com/oemparts/a/hon/511a8da1f870022e4ccd3250/front-brake-caliper

Notice the part number has changed.

 

[Frulk_imp]

Thanks Popgun. I was surprised to find out after I got home and looked at the 2013 Honda Service Manual that it didn’t list OEM part numbers for common replacement parts.

 

[Randy B]

06455-MGC-016 x2

 

[jdvalero_imp]

If you choose to or want to go NON OEM goolge FA296 or FA296HH (SIntered) EBC brake pads are really good. I have them on my bike.

 

[RCalderone_imp]

If you choose to or want to go NON OEM goolge FA296 or FA296HH (SIntered) EBC brake pads are really good. I have them on my bike.

I am considering going EBC FA296HH. Do you find them to be squeaky? Any issues? Thanks!

 

[iamheero_imp]

If you choose to or want to go NON OEM goolge FA296 or FA296HH (SIntered) EBC brake pads are really good. I have them on my bike.

I am considering going EBC FA296HH. Do you find them to be squeaky? Any issues? Thanks!

I am considering going EBC FA296HH. Do you find them to be squeaky? Any issues? Thanks!
I have always used the 296hh. In fact, since my '17 brakes were squeaky beforehand (to the point it caused me issues), the FA296hh pads actually helped reduce that significantly. I noticed no squeaking on my '14 when I used them for about 36,000 miles. They're great, I think they have slightly more bite than the OEM pads. A little dusty, but I don't have enough experience with the OEMs to say if it's a big difference.