Battery Tender pigtail installation

[AKB_imp]

Before I take a stab at installing the my battery tender permanent rings on by CB1100, I was curious if anyone has any advice or suggestion on the best way to route the cable for quick hookup/disconnect?

Couldn't find a thread on this topic, but if there is one just let me know.

Thanks!

 

[LongRanger_imp]

Not sure if there's a right or wrong way. Mine emerges from beneath the left side cover. I'm sure others have theirs routed differently.

 

[the Ferret]

There is a hole in the sub fender r/h side by the rear shock. I ran mine out there.

 

[LongRanger_imp]

Hmm, I may have to move mine...

 

[uscgmac_imp]

Permanent rings? What could be permanent. Anyway, I routed mine to stick out from under the seat right behind the upper rear shock.

Sent from my SM-T350 using Tapatalk

 

[kennyw]

There is a hole in the sub fender r/h side by the rear shock. I ran mine out there.

That is where mine went. The hard part was putting the connections in a position that doesn't interfere with installing the tool box/plastic tray.

 

[Rocky_imp]

My Optimate pigtail was already dealer-installed under the seat when I took delivery.

http://s392.photobucket.com/user/Rock500_2008/media/Motorcycles/Honda CB1100A/IMG_1998.jpg.html

 

[johnf514_imp]

There is a hole in the sub fender r/h side by the rear shock. I ran mine out there.

+1

 

[the Ferret]

 

[mininsx_imp]

I had mine routed out the left side under the silver side cover but it got chain lube on it there, so I moved it to the right side.

 

[AKB_imp]

Very helpful - thanks to everyone for the suggestions!

 

[uscgmac_imp]

I can tuck it back under seat while not in use.

Sent from my SM-J700T using Tapatalk

 

[AKB_imp]

Permanent rings? What could be permanent. Anyway, I routed mine to stick out from under the seat right behind the upper rear shock.

Sent from my SM-T350 using Tapatalk

Very true - should have used temporary!