2014 Parts

[The Spaceman_imp]

The fische for the 2014 parts are online now. I looked up a few. Prices are rounded off.

Dual exhaust $1,300
Seat $300
Left side aluminum cover $180

I never liked the big plastic sprocket cover, so I will order one of the new ones. The new seat is nice too.

 

[CB4ME_imp]

The fische for the 2014 parts are online now. I looked up a few. Prices are rounded off.

Dual exhaust $1,300
Seat $300
Left side aluminum cover $180

I never liked the big plastic sprocket cover, so I will order one of the new ones. The new seat is nice too.

Spaceman - do you have a URL?

 

[Joola_imp]

They've been up on Honda Parts House for a few weeks. I already placed an order for the deluxe side covers. I got an email 2 weeks after I ordered saying they are on "global backorder," likely because the bike wasn't out yet. Hopefully they ship next month.

I also noticed you can now get the factory black rear sets and seat garnish pieces (among others) without having to order from Japan.

 

[Ack-CB11_imp]

I noticed different frame and center stand numbers between the years if anyone is thinking factory duals on a '13. It could be a real big and costly project.

http://www.partsfish.com/oemparts/#/c/honda_motorcycle_2014/parts

 

[The Spaceman_imp]

The fische for the 2014 parts are online now. I looked up a few. Prices are rounded off.

Dual exhaust $1,300
Seat $300
Left side aluminum cover $180

I never liked the big plastic sprocket cover, so I will order one of the new ones. The new seat is nice too.

Spaceman - do you have a URL?

Yes, it's
http://www.kennethmoore.org

Oh, you mean for the parts? Sure, it's
http://www.hondapartshouse.com/oemparts

 

[Gingersdaddy_imp]

Hope they fit, I thought I read some where that the seats were different on the 14 due to the larger tank??

Oops, Just saw another thread, the 14 seat will fit the 13.

 

[CB4ME_imp]

The fische for the 2014 parts are online now. I looked up a few. Prices are rounded off.

Dual exhaust $1,300
Seat $300
Left side aluminum cover $180

I never liked the big plastic sprocket cover, so I will order one of the new ones. The new seat is nice too.

Spaceman - do you have a URL?

Yes, it's
http://www.kennethmoore.org

Oh, you mean for the parts? Sure, it's
http://www.hondapartshouse.com/oemparts

Yes, it's
http://www.kennethmoore.org

Oh, you mean for the parts? Sure, it's
http://www.hondapartshouse.com/oemparts
Thanks! A great resource! Took me a minute to figure out the Deluxe was the CB1100 SA (the dual exhaust was a dead give away - duh)

Great price for the sprocket cover from Partsfish (about $12 less than Hondahouse). I spent $50 more getting mine from Japan.

 

[Randy B]

Guys if you are wanting to convert from a single muffler to the factory dual exhaust system you had better take a close look at the phish first. The big, HUGE, glaring thing that jumped out at me was the fact that there are two O2 sensors in the EX/DLX. I guarantee that our harness only has a provision for one.

Not only that, that $1300 is only for the head pipes, not the mufflers, or anything else to install them. I quick guess would be more than $2000 to swap over to the factory system, and that would be before knowing for sure that we could make the harness for the 14 EX/DLX work on the 13, and just how much of the harness would we need? I haven't even looked into if it's a pigtail harness, or if the bike uses one complete integrated harness that would need to be totally swapped out to make it work. And if that's the case, then would the standard ECU even accept the input from two O2 sensors? That's a whole nother can-O-worms.

Check it out.

http://www.hondapartshouse.com/oemparts/a/hon/52f28c2cf870021404ec5a7f/exhaust-muffler-2

 

[Guth_imp]

If I was really dead set on having dual exahust, I'd get serious and spring for the Moriwaki setup that ACK is sporting on his bike. But only after I had ensured that I could find a center stand that would accommodate it.

 

[The Spaceman_imp]

FWIW: I'm not interested in the duals myself; the post was mostly an FYI thing.

I am VERY interested to learn if they provide the dual-wall headers on the base model with the single can. If they do, and they fit the 13, I'd definitely go for those. Even if they do rust out eventually...
http://www.hondapartshouse.com/oemparts/a/hon/52f28c02f870021404ec5a46/exhaust-muffler-1

 

[flynrider]

FWIW: I'm not interested in the duals myself; the post was mostly an FYI thing.

I am VERY interested to learn if they provide the dual-wall headers on the base model with the single can. If they do, and they fit the 13, I'd definitely go for those. Even if they do rust out eventually...
http://www.hondapartshouse.com/oemparts/a/hon/52f28c02f870021404ec5a46/exhaust-muffler-1

Just from looking at the pictures available, I'd say the standard uses the same single wall stainless headers as the 13. The double wall headers look fatter and usually are chromed.

 

[Randy B]

Part numbers are the same for the 13 and 14 standard pipes.