2014 Ignition Key

[tomcat_imp]

Anyone know an ignition key blank number(not the big plastic head OEM key)?

 

[mvk24_imp]

I might have one on my blank key for my 2014 if it is still in the bag standby.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Here ya go. I never got it cut because my neighbor i got the bike from found his spare

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

 

[tomcat_imp]

Thanks mvk24, but I'm looking for a blank without the large plastic head and hope there is one out there.

 

[mvk24_imp]

O gotcha gotcha. I didnt know what you meant by plastic head since that is just the factory key.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

 

[tomcat_imp]

Prefer the bare metal key instead of the plastic head key. Found a locksmith on ebay that cuts to code. Fingers crossed...

 

[mvk24_imp]

Prefer the bare metal key instead of the plastic head key. Found a locksmith on ebay that cuts to code. Fingers crossed...

Thats awesome, please share his link if it works i would like to have another spare around.

I needed some special locksmith to cut the blank factory key so I never did it


2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

 

[pekingduck]

The 2013-2014 keys from Honda always have the plastic knob. Locksmiths use either Ilco X265 or HD109.

 

[mvk24_imp]

The 2013-2014 keys from Honda always have the plastic knob. Locksmiths use either Ilco X265 or HD109.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

 

[suhawk305]

Agree with Pekingduck. The ferret and I found that this metal key blank works on our CB 1100s:
Ilco X265. HD109

Both of us found our local locksmiths sells and cuts these blanks.

 

[Gone in 60]

My spare was cut from a JMA key. The designation on the back says "HOND 33"

Just don't make my mistake when you get yours cut... don't stand there in front of the locksmith turning the key, expecting it to start the engine, and then complain to the locksmith that the key doesn't work. He'll roll his eyes and say "You know you have to push that button on the handlebar to start it, right?"

 

[mvk24_imp]

My spare was cut from a JMA key. The designation on the back says "HOND 33"

Just don't make my mistake when you get yours cut... don't stand there in front of the locksmith turning the key, expecting it to start the engine, and then complain to the locksmith that the key doesn't work. He'll roll his eyes and say "You know you have to push that button on the handlebar to start it, right?"

Lmao, where did you guys get the "code" for the key to work with your ignition? Is it a key code number on the frame or something?


2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

 

[pekingduck]

The 2013-2014 keys from Honda always have the plastic knob. Locksmiths use either Ilco X265 or HD109.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine.

 

[mvk24_imp]

The 2013-2014 keys from Honda always have the plastic knob. Locksmiths use either Ilco X265 or HD109.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine. So basically the lock Smith does it buy eye/in person with the original key is what you're saying?

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

 

[Gone in 60]

I just called around my area and found a dedicated locksmith shop who cut the key using one of my originals. I got the blank from Ebay.

 

[mvk24_imp]

I just called around my area and found a dedicated locksmith shop who cut the key using one of my originals. I got the blank from Ebay.

That makes sense thats what I think they told me to do when I got my blank from the dealer.

Mind saying how much the locksmith charged you? I think I got quoted a price that I laughed at and thats why I never got it done

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

 

[pekingduck]

The 2013-2014 keys from Honda always have the plastic knob. Locksmiths use either Ilco X265 or HD109.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine. So basically the lock Smith does it buy eye/in person with the original key is what you're saying?

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine. So basically the lock Smith does it buy eye/in person with the original key is what you're saying?

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
They use a tracing or duplicating machine.

Yamaha does not provide keys directly, instead directing their dealer to make inquiries to:

https://www.championkeys.com/product/keys-by-code/

They cut keys by code. I have spoken with them, and they can cut the new 2017 CB1100EX "wave-cut" keys.
Price is currently $45, a bargain if you've done the unthinkable.

 

[mvk24_imp]

The 2013-2014 keys from Honda always have the plastic knob. Locksmiths use either Ilco X265 or HD109.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine. So basically the lock Smith does it buy eye/in person with the original key is what you're saying?

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine. So basically the lock Smith does it buy eye/in person with the original key is what you're saying?

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
They use a tracing or duplicating machine.

Yamaha does not provide keys directly, instead directing their dealer to make inquiries to:

https://www.championkeys.com/product/keys-by-code/

They cut keys by code. I have spoken with them, and they can cut the new 2017 CB1100EX "wave-cut" keys.
Price is currently $45, a bargain if you've done the unthinkable.

Do you know how we would go about ordering a key by code of theres no code on the factory keys?

Like how would they know to cut it for our specific ignition

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
For many years, there has been no publicly available source for Honda (and most Japanese manufacturers) key codes. The simple, hand-held key cutting machines have been replaced with electronic cutting machines that are way too expensive for motorcycle dealers to buy.
Around 10 years ago, there were only 3 or 4 Honda dealers who had bought the machines. So the key manufacturers/sellers stopped providing any conversions between the manufacturer's code and the machine. So basically the lock Smith does it buy eye/in person with the original key is what you're saying?

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
They use a tracing or duplicating machine.

Yamaha does not provide keys directly, instead directing their dealer to make inquiries to:

https://www.championkeys.com/product/keys-by-code/

They cut keys by code. I have spoken with them, and they can cut the new 2017 CB1100EX "wave-cut" keys.
Price is currently $45, a bargain if you've done the unthinkable. Thats good info, I have a 2014 so I assume its an older style key they cannot cut from 2017 back ?

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

 

[the Ferret]

My 2014 spare key is an Ilco HD 109 cut by Mr Lock for like $4, I carry it in my wallet.

 

[Gone in 60]

I just called around my area and found a dedicated locksmith shop who cut the key using one of my originals. I got the blank from Ebay.

That makes sense thats what I think they told me to do when I got my blank from the dealer.

Mind saying how much the locksmith charged you? I think I got quoted a price that I laughed at and thats why I never got it done

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Heck, this is going back to 2019 when I bought the bike and just wanted a spare to keep my original keys safe... couldn't have been more than ten bucks.

That's just a simple, straight-cut key for my 2013 CB. For one of the fancier ones, like a newer bike, I'm sure it would be a lot more. I had the metal "emergency" portion of a spare key cut for my car, and it was a lot more since it was a laser-cut key.

 

[mvk24_imp]

My 2014 spare key is an Ilco HD 109 cut by Mr Lock for like $4, I carry it in my wallet.

I'm gonna look that up. I'd like to have a throw away spare somewhere on the bike incase something happens to the key on long trips.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca