2010 with Full Yoshi PCV ...Need Map

[Jcscoetzee_imp]

Hey guys!

Long time follower, first time poster.

I have a 2010 CB1100 with a PCV, full titanium yoshi exhaust and K&N filter.

The bike seems to be running rich, and is burning too much fuel. I’m getting 150kms to a tank of 98 octane in Australia.

I want to remap the PCV, but can’t find a list of suitable maps.

Could someone please point me in the right direction??

Thanks!!

Sent from my iPhone using Tapatalk

 

[PowerDubs_imp]

None of the pre-existing maps you can download will work ideally for a full pipe and air filter.

The only 2 'official' options are stock, or stock w/ slip on muffler.

...and amusingly- if you look at actual info given on the files, even though they both have the same target table, the trims are way different than each other. More-so than I would ever think from just a muffler.

I would 110% suggest since you already have the full pipe, and power commander- purchase and install the auto tune kit. It makes a huge difference if you understand how it works.

 

[Jcscoetzee_imp]

None of the pre-existing maps you can download will work ideally for a full pipe and air filter.

The only 2 'official' options are stock, or stock w/ slip on muffler.

...and amusingly- if you look at actual info given on the files, even though they both have the same target table, the trims are way different than each other. More-so than I would ever think from just a muffler.

I would 110% suggest since you already have the full pipe, and power commander- purchase and install the auto tune kit. It makes a huge difference if you understand how it works.

Thanks @PowerDubs I’ll look into where I can get my hands on one of the auto tunes here in Aus as our dollar is so weak at the moment.

Much appreciated!


Sent from my iPhone using Tapatalk

 

[Cormanus]

Nice looking bike Jscoetzee. Welcome to the forum.