Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rust and Corrosion
#31
(01-05-2021, 03:26 AM)peterbaron_imp Wrote: I would never like to have a heated garage while using salty roads....it speeds up corrosion due to higher temps = catalyst

Of course.

However, some owners [of any vehicle] seem to still do it.
Reply
#32
(01-05-2021, 03:26 AM)peterbaron_imp Wrote: I would never like to have a heated garage while using salty roads....it speeds up corrosion due to higher temps = catalyst

You're abs. right, but the problem with this ?
what do you do if your garage is heated by design or location (under your parlor). Park outside until end of winter ? Or fool around with a tooth brush between the cylinder fins before you open the garage door?

My bike and me loooove hibernation Wink
Reply
#33
(01-05-2021, 07:58 AM)j3gq_imp Wrote:
(01-05-2021, 03:26 AM)peterbaron_imp Wrote: I would never like to have a heated garage while using salty roads....it speeds up corrosion due to higher temps = catalyst

You're abs. right, but the problem with this ?
what do you do if your garage is heated by design or location (under your parlor). Park outside until end of winter ? Or fool around with a tooth brush between the cylinder fins before you open the garage door?

My bike and me loooove hibernation Wink

You're abs. right, but the problem with this ?
what do you do if your garage is heated by design or location (under your parlor). Park outside until end of winter ? Or fool around with a tooth brush between the cylinder fins before you open the garage door?

My bike and me loooove hibernation Wink
If I got into situation as described by you, I would make an appropriate parking decision that keeps my soul and mind in a satisfactory balance.
Dont't split hairs, live is too short to create problems Smile
Reply
#34
YOU are SOOO right Wink
Reply
#35
(01-05-2021, 07:58 AM)j3gq_imp Wrote:
(01-05-2021, 03:26 AM)peterbaron_imp Wrote: I would never like to have a heated garage while using salty roads....it speeds up corrosion due to higher temps = catalyst

You're abs. right, but the problem with this ?
what do you do if your garage is heated by design or location (under your parlor). Park outside until end of winter ? Or fool around with a tooth brush between the cylinder fins before you open the garage door?

My bike and me loooove hibernation Wink

"heated by design"? - turn off/redirect the heat from the garage.

In theory (a well designed house), if there is a room above the garage, it ought to be properly insulated from the garage. In addition, heat rises, so any heat in the garage will tend to permeate up.

Fix those issues and your garage should settle closer to outside ambient temperature without the wind chill. You will still have humidity and dryness issues, depending on your region.

When you need heat, disable redirection or turn on an electric heater. An electric heater actually dries the air.

Anyway, I don't have a garage so the bikes get nice 'n' cold.
Reply
#36
My parking situation has a big tool box, a TV and a coffee maker. And it's under my house, so if I am needed, my wife can stomp on the floor to let me know.
My mind and soul are very happy.
Reply
#37
(01-05-2021, 08:45 AM)Gone in 60_imp Wrote: My parking situation has a big tool box, a TV and a coffee maker. And it's under my house, so if I am needed, my wife can stomp on the floor to let me know.
My mind and soul are very happy.

Sweet haven.
Reply
#38
Dave, you are not alone in having rust issues with the CB1100. I don’t think some of the materials used are fit for purpose.
Reply
#39
(01-05-2021, 01:57 PM)Cormanus_imp Wrote: Dave, you are not alone in having rust issues with the CB1100. I don’t think some of the materials used are fit for purpose.

Thank you Cormanus. Out of all the bikes I have owned NONE have exhibited rust like my CB1100. I still love this bike, and I still plan to NEVER sell it. I just have to pay extra close attention to keep it clean and rust free.
Reply
#40
(01-06-2021, 01:51 PM)Dave_imp Wrote:
(01-05-2021, 01:57 PM)Cormanus_imp Wrote: Dave, you are not alone in having rust issues with the CB1100. I don’t think some of the materials used are fit for purpose.

Thank you Cormanus. Out of all the bikes I have owned NONE have exhibited rust like my CB1100. I still love this bike, and I still plan to NEVER sell it. I just have to pay extra close attention to keep it clean and rust free.

Dave, I have to admire your admiration for the CB1100; I mean, you went through quite a bit with the high/low idle issue and got that sorted out and you have the rust issue. Yet you seem to thoroughly enjoy the bike still. I'm happy for you in that regard.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rust on mudguards Classico_imp 15 775 07-11-2022, 06:22 AM
Last Post: Classico_imp
  Rust on tank from crash calipo223_imp 6 403 09-17-2020, 05:06 PM
Last Post: jtopiso_imp
  Rust dave 1 158 04-02-2016, 02:13 AM
Last Post: Ghost_diver_imp
  Corrosion On Shocks and ABS sorrentino100_imp 10 576 08-06-2015, 08:00 AM
Last Post: Pterodactyl_imp
  Rust on lower fork bracket LiveToRide_imp 134 6,913 05-12-2015, 05:23 AM
Last Post: Elipten_imp
  triple tree Rust (not the Fork Brace) LiveToRide_imp 16 701 12-21-2014, 12:36 PM
Last Post: Pterodactyl_imp
  Corrosion Control Recommendation Red Mist_imp 6 370 03-20-2014, 05:51 AM
Last Post: The Spaceman_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)