Sissybar/backrest info (from sidecar pics)

[Bbref36_imp]

Get long longish bolts and use one of those small hacksaws with thin blades and a fine tooth file to cut down and debur to achieve a perfect size. Use a vice to make the cut.

That's what I was thinking. Thanks again

[Buffalohead_imp]

Get long longish bolts and use one of those small hacksaws with thin blades and a fine tooth file to cut down and debur to achieve a perfect size. Use a vice to make the cut.

That's what I was thinking. Thanks again

That's what I was thinking. Thanks again
Put a nut on before you cut the bolt. After cutting, remove the nut and the threads will be perfectly normal. Sometimes when you're filing, you can get a bit of a flat spot. Removing the nut makes it straight. It ensures the threads will be de-burred too. It always works for me.

Sometimes, when you have something that is to be bolted on, but you would rather have studs, you can use the nut to cut the head of the bolt off and make a stud by cleaning up the threads.

[pwyakjr@stny.rr.com_imp]

received the jardine and the factory backrest today. I have some ideas. how about posting some pics on how the two go together??? thanks

[Buffalohead_imp]

received the jardine and the factory backrest today. I have some ideas. how about posting some pics on how the two go together??? thanks

Do you mean the Jardine backrest and the factory rack?

I plan to get Mike to take some pics of the details in the next few days.

[pwyakjr@stny.rr.com_imp]

yes. factory rack.

[CB4ME_imp]

Here's a picture of the Jardine mini and the factory rear carrier on an amatuerish but solid mount.

I'll be interested in what Mike did and what you come up with.

[pwyakjr@stny.rr.com_imp]

yea that is what I was thinking. i know where i can get some stainless steel, i'm sure after i'm done i can polish it up nice. i just installed the Over crash bar boy does that look nice. buffalohead stated mike did his installation without the stainless triangle, i wonder what he did???? i just read somewhere online the the cb1100 was voted the best new motorcycle of 2013.

[Buffalohead_imp]

Pwyak, Mike keeps forgetting to bring his camera. I will do my best to get some pics. Mike's is a clean installation.

[the Ferret]

Here's a picture of the Jardine mini and the factory rear carrier on an amatuerish but solid mount.

I'll be interested in what Mike did and what you come up with.

I think that is an excellent adaptation of two pieces not really meant to go together. Good job!

[CB4ME_imp]

Buffalohead asked me to post these 3 picture's from Mike's bike.

Mike took the clean and simple approach as you can see.







The Jardine sissybar comes with two M10x1.5x25 bolts but it appears Mike used longer 3/8" bolts instead. Notice he slightly bent the bolts where they meet the sissybar.

Very nice!