Login

RetroSeattle_imp · 02-24-2015, 06:52 AM

I received another magic box from Takashi at Samurider with my new K&H Hi seat, and my chrome gauge covers.

The workmanship on the K&H seat is wonderful and it fits perfectly. I haven't done a test ride yet, but the garage sit test confirms that the higher seating position un-kinks my long legs.

Samurider gets my vote as the best and most responsive parts supplier. Expensive, and worth it.

Has anybody done a headlight aiming exercise?

Lord Popgun · 02-24-2015, 06:55 AM

The red stitching in the seat really looks good on that red bike. Thumbs Up

the Ferret · 02-24-2015, 07:23 AM

Beautiful!

as for headlight aiming, I only worry about the high beam. If its dark I want to see as far as I can clearly on high beam... so I go out at night, leave my headlight loose enough I can move it, and stick an allen in my pocket. Stop on a long flat stretch of road where there are no streetlights, and raise the headlight for best view in those conditions and then tighten it there. It's easy to tell when you have it right.

RetroSeattle_imp · 02-24-2015, 01:11 PM

Following an hour ling ride I can confirm that the K&H Hi seat is an improvement for me. I have long legs and my knees don't feel as bent with this one. I will have to make a longer journey soon to check on the time between leg stretching stops. Biker

gossman_imp · 02-24-2015, 01:27 PM

Love the seat and really interested in the way you got the bike up on the centerstand while on the dolly. Is it as hairy as it looks?

RetroSeattle_imp · 02-24-2015, 02:20 PM

No problem, I just make sure that the center stand feet are centered on the dolly and give her the old heave ho. I am 6'4" and 235 pounds so have a bit of an advantage there. The dolly really makes it easy to move things around in the ManShack.

gossman_imp · 02-24-2015, 03:37 PM

(02-24-2015, 02:20 PM)RetroSeattle_imp Wrote: No problem, I just make sure that the center stand feet are centered on the dolly and give her the old heave ho. I am 6'4" and 235 pounds so have a bit of an advantage there. The dolly really makes it easy to move things around in the ManShack.

I'm 6'4 and 326 so it shouldn't be an issue here either. Time for harbor freight now.

**Cormanus** · 02-24-2015, 06:20 PM

Headlight aiming: http://cb1100forum.com/forum/showthread.php?tid=905

bikerdave_imp · 02-27-2015, 10:31 AM

Dear Retro, Where did you get the dolly? It really looks like a good idea. And I'll really bet it helps in moving things around in the cave.

Lord Popgun · 02-27-2015, 10:51 AM

Probably here: http://www.legalspeeding.com/Park-n-Move.htm

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Gauge Mods	Seancampbell777_imp	11	799	10-16-2024, 04:14 AM Last Post: Gone in 60
	2017 CB1100EX Color matched side covers	ceeko_imp	66	3,019	06-25-2023, 10:17 PM Last Post: peterbaron
	Corbin seat arrived and.......	Ollie	9	614	07-22-2022, 01:03 AM Last Post: Ollie
	improved seat and 3 cm higher SEAT. the best reform	Alfgaxatico_imp	1	236	04-25-2021, 04:47 AM Last Post: GoldOxide_imp
	Parcel arrived today	Mixagon_imp	11	776	03-07-2021, 10:03 PM Last Post: GoldOxide_imp
	side covers plastic or aluminium?	mrded_imp	8	489	10-03-2020, 11:33 AM Last Post: GoldOxide_imp
	Adding an oil pressure gauge	wiscoaircraftmech_imp	7	431	06-30-2020, 01:41 AM Last Post: wiscoaircraftmech_imp
	Aftermarket Brake and Clutch Reservoir Covers	michael1954	11	724	06-17-2020, 08:42 AM Last Post: Mtneers
	Side Covers	YotaMan_imp	42	1,823	05-16-2020, 08:59 PM Last Post: Guth_imp
	Designing an Engine Oil Temperature Display Gauge Project	17-CB-002	37	1,635	11-06-2019, 04:10 AM Last Post: GoldOxide_imp

Threaded Mode K&H Hi seat and gauge covers arrived!
Author	Message