Login

rusty1_imp · 02-28-2016, 05:35 PM

Just put a Shoei fm-2 on my bike, I have had them on some of my bikes over the years and do like the looks and the protection. I can not wait to get riding again. Hopefully by April 2nd. This is 2nd to last thing I plan on doing to this bike, my last thing [when they show up] are a set of magtan jb-4 wheels in gold.

**Cormanus** · 02-28-2016, 06:23 PM

You've done a lovely job on that bike, Rusty.

Razor · 02-28-2016, 10:03 PM

Paint looks great? I like the fairing, no doubt sheds air better than most of the other fairings. Nice job!

the Ferret · 02-28-2016, 10:07 PM

Very retro cool!

drodg33 · 02-29-2016, 03:06 AM

Looks good. How hard is it to install on the CB?

redbirds_imp · 02-29-2016, 03:30 AM

Very nice. Looks like that fairing offers good protection for your hands.

dsan1964_imp · 02-29-2016, 03:40 AM

Nice job!

Sent from my iPhone using Tapatalk

rusty1_imp · 03-01-2016, 04:01 PM

(02-29-2016, 03:06 AM)drodg58_imp Wrote: Looks good. How hard is it to install on the CB?

Hi drodg58, It was not hard to install, just had to made two brackets to move the signal light up about 2.25 inch's. The mount kit [on the bars] was a little ugly, so I got some nice aluminum ones from a Memphis shade kit with nickel coated round uprights. Cut the lower lip off the glove shelf, so I could put a radar detector in with a heads up display from legal speeding. I also sprayed the inside of fairing satin black and clear coated the outside. Like to try it out to see how it is, but it snowed here today.

drodg33 · 03-03-2016, 09:33 AM

(03-01-2016, 04:01 PM)rusty1_imp Wrote:
(02-29-2016, 03:06 AM)drodg58_imp Wrote: Looks good. How hard is it to install on the CB?

Hi drodg58, It was not hard to install, just had to made two brackets to move the signal light up about 2.25 inch's. The mount kit [on the bars] was a little ugly, so I got some nice aluminum ones from a Memphis shade kit with nickel coated round uprights. Cut the lower lip off the glove shelf, so I could put a radar detector in with a heads up display from legal speeding. I also sprayed the inside of fairing satin black and clear coated the outside. Like to try it out to see how it is, but it snowed here today.

Hi drodg58, It was not hard to install, just had to made two brackets to move the signal light up about 2.25 inch's. The mount kit [on the bars] was a little ugly, so I got some nice aluminum ones from a Memphis shade kit with nickel coated round uprights. Cut the lower lip off the glove shelf, so I could put a radar detector in with a heads up display from legal speeding. I also sprayed the inside of fairing satin black and clear coated the outside. Like to try it out to see how it is, but it snowed here today.
Thank you! BTW it looks really good.

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	power port and Samurider Road Comet Fairing 1	tdbru	9	972	05-04-2025, 07:20 PM Last Post: tdbru
	Batwing fairing ISO	Griz53_imp	1	319	01-22-2023, 03:11 AM Last Post: mvk24_imp
	Road Comet Fairing	Catbird_imp	47	4,210	08-16-2022, 10:33 PM Last Post: Lord Popgun
	Rebel 500 SE style fairing?	LayerCake_imp	0	278	06-12-2022, 09:03 AM Last Post: LayerCake_imp
	vetter fairing help	Canadianredneck_imp	12	1,015	03-31-2022, 12:51 PM Last Post: rboe
	Windjammer ss. Install	caddy425_imp	15	1,199	03-29-2022, 01:28 PM Last Post: Canadianredneck_imp
	Puig Plus install question	Rolls_imp	16	1,263	01-24-2022, 04:33 AM Last Post: j3gq_imp
	Yoshimura RS3 Install. 2013 Kit on a 2014 and sorted the center stand issue!	rdtshaw_imp	17	1,245	01-05-2022, 10:54 PM Last Post: Nibis_imp
	Honda top case install	Jonnyteabag_imp	11	864	12-31-2021, 09:22 AM Last Post: Jonnyteabag_imp
	road comet fairing	vfrpaul98_imp	75	4,999	10-21-2021, 02:41 AM Last Post: Lord Popgun

Threaded Mode Shoei fairing Install
Author	Message