+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Shoei fairing Install (/showthread.php?tid=9429)
Shoei fairing Install - rusty1_imp - 02-28-2016
Just put a Shoei fm-2 on my bike, I have had them on some of my bikes over the years and do like the looks and the protection. I can not wait to get riding again. Hopefully by April 2nd. This is 2nd to last thing I plan on doing to this bike, my last thing [when they show up] are a set of magtan jb-4 wheels in gold.
RE: Shoei fairing Install - Cormanus - 02-28-2016
You've done a lovely job on that bike, Rusty.
RE: Shoei fairing Install - Razor - 02-28-2016
Paint looks great? I like the fairing, no doubt sheds air better than most of the other fairings. Nice job!
RE: Shoei fairing Install - the Ferret - 02-28-2016
Very retro cool!
RE: Shoei fairing Install - drodg33 - 02-29-2016
Looks good. How hard is it to install on the CB?
RE: Shoei fairing Install - redbirds_imp - 02-29-2016
Very nice. Looks like that fairing offers good protection for your hands.
Shoei fairing Install - dsan1964_imp - 02-29-2016
Nice job!
Sent from my iPhone using Tapatalk
RE: Shoei fairing Install - rusty1_imp - 03-01-2016
(02-29-2016, 03:06 AM)drodg58_imp Wrote: Looks good. How hard is it to install on the CB?
Hi drodg58, It was not hard to install, just had to made two brackets to move the signal light up about 2.25 inch's. The mount kit [on the bars] was a little ugly, so I got some nice aluminum ones from a Memphis shade kit with nickel coated round uprights. Cut the lower lip off the glove shelf, so I could put a radar detector in with a heads up display from legal speeding. I also sprayed the inside of fairing satin black and clear coated the outside. Like to try it out to see how it is, but it snowed here today.
RE: Shoei fairing Install - drodg33 - 03-03-2016
(03-01-2016, 04:01 PM)rusty1_imp Wrote:(02-29-2016, 03:06 AM)drodg58_imp Wrote: Looks good. How hard is it to install on the CB?
Hi drodg58, It was not hard to install, just had to made two brackets to move the signal light up about 2.25 inch's. The mount kit [on the bars] was a little ugly, so I got some nice aluminum ones from a Memphis shade kit with nickel coated round uprights. Cut the lower lip off the glove shelf, so I could put a radar detector in with a heads up display from legal speeding. I also sprayed the inside of fairing satin black and clear coated the outside. Like to try it out to see how it is, but it snowed here today.
Hi drodg58, It was not hard to install, just had to made two brackets to move the signal light up about 2.25 inch's. The mount kit [on the bars] was a little ugly, so I got some nice aluminum ones from a Memphis shade kit with nickel coated round uprights. Cut the lower lip off the glove shelf, so I could put a radar detector in with a heads up display from legal speeding. I also sprayed the inside of fairing satin black and clear coated the outside. Like to try it out to see how it is, but it snowed here today.
Thank you! BTW it looks really good.