Login

metalmaven_imp · 08-17-2015, 03:44 AM

I saw 2 old threads about the Airhawk seat pads but wanted to start a new one as those were kind of old.

Does anyone use the Airhawk seat cushions? What model?

the Ferret · 08-17-2015, 07:16 AM

Tried one but didn't like it and returned it. I've also tried the Gel Pads..gave them to my brother.
With either one I just couldn't get past the " disconnected" to the bike feeling.

Others however love them.

Chapomis_imp · 08-17-2015, 07:26 AM

I didn't much care for the Airhawk either, I agree with Ferrets "disconnected" feeling. I did recently get a gel/memory foam pad after seeing Ole's at the Rally, I like a lot. I bought a pinion pad, around 7 x 10" and I put it lengthwise on the stock seat, so the pad isn't under my legs....just where needed.

pwh421_imp · 08-17-2015, 08:44 AM

(08-17-2015, 07:26 AM)Chapomis_imp Wrote: I didn't much care for the Airhawk either, I agree with Ferrets "disconnected" feeling. I did recently get a gel/memory foam pad after seeing Ole's at the Rally, I like a lot. I bought a pinion pad, around 7 x 10" and I put it lengthwise on the stock seat, so the pad isn't under my legs....just where needed.

After a nice long ride today I think I'd like a little more cushion, your solution sounds right . Can you post pics of what you got? Also where you got it?

Peter

kennyw · 08-17-2015, 09:32 AM

I found the Airhawk made me feel like I was sitting on a beach ball and returned it as well. The Corbin seat make me feel like the bike is connected to me better than the stock or Tiros-K seats.

Lord Popgun · 08-17-2015, 09:43 AM

I use a medium cruiser Airhawk on my ST and love it. On the CB I use a medium (pretty sure-- I can look) pillion in the rider position and love it.

Are you guys sure you didn't have too much air in it? Not supposed to have much.

Pterodactyl_imp · 08-17-2015, 09:45 AM

A couple of years ago, halfway through a 4000km trip to South Australia, I suddenly felt the need for an Airhawk. The CB seat was very new and after a day or so in the saddle I found that I had to stand on the pegs every so often to get the blood back where it should be. I bought one in Adelaide. Over the many kilometres since then my backside has never regretted it.

As far as being "connected" to the bike is concerned it makes not a whit of difference to me whether the Airhawk is on or not. Last weekend I did a 900km trip and wasn't aware of it at all, it's just part of the deal. For short or day trips, I don't use it, mainly because I don't think it adds at all to the look of the bike and the seat has become softer with use.

The model? Well pictured below is a photo of the label that I posted in one of those previous threads. I think there are new, and betterer models available now.

[Image: 29c7818b79b599a2b05576c7e01ec3e5.jpg]

[Image: 29c7818b79b599a2b05576c7e01ec3e5.jpg]

Cheers

kennyw · 08-17-2015, 11:32 AM

(08-17-2015, 09:43 AM)Lord Popgun_imp Wrote: I use a medium cruiser Airhawk on my ST and love it. On the CB I use a medium (pretty sure-- I can look) pillion in the rider position and love it.

Are you guys sure you didn't have too much air in it? Not supposed to have much.

Yes, I started at over inflated and keep letting air out until I was back down on the seat. It bothered me that the seat under my rump didn't move with the bike in corners. If I leaned one direction or another, the seat would squish down on the heavy side and lift me on the opposite side.

metalmaven_imp · 08-17-2015, 09:01 PM

Thanks guys, for the price I think I will just buy the corbin seat, which is what i really want. That is probably where I will end up anyways, just exploring options before ordering this fall.

Chapomis_imp · 08-17-2015, 09:49 PM

(08-17-2015, 08:44 AM)pwh421_imp Wrote:
(08-17-2015, 07:26 AM)Chapomis_imp Wrote: I didn't much care for the Airhawk either, I agree with Ferrets "disconnected" feeling. I did recently get a gel/memory foam pad after seeing Ole's at the Rally, I like a lot. I bought a pinion pad, around 7 x 10" and I put it lengthwise on the stock seat, so the pad isn't under my legs....just where needed.

After a nice long ride today I think I'd like a little more cushion, your solution sounds right . Can you post pics of what you got? Also where you got it?

Peter

After a nice long ride today I think I'd like a little more cushion, your solution sounds right . Can you post pics of what you got? Also where you got it?

Peter
Peter, here's a link for the pad I use: http://royalriding.com/motorcycle-seat-p...ry=5320057

I also bought this one for my TW: Small Cool-Tush Gel Seat Pad with Memory Foam

[url=http://s1298.photobucket.com/user/aswreed/media/8A19D8F4-A4D1-42AA-BB5F-E9E1B7617F0C_zpsdlsvkdca.jpg.html] [Image: 1f7a251f45ac4bc555f5cb58f64ed76b.jpg]

[Image: 1f7a251f45ac4bc555f5cb58f64ed76b.jpg]

It measures 7 x 11"

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Knee Pads, 2017 EX	cookiemech	18	894	07-10-2023, 01:24 PM Last Post: tommymck_imp
	improved seat and 3 cm higher SEAT. the best reform	Alfgaxatico_imp	1	234	04-25-2021, 04:47 AM Last Post: GoldOxide_imp
	Tech Spec Tank Pads	2017EX_imp	3	279	08-06-2020, 06:10 AM Last Post: peterbaron
	ecu/knee pads	Southwend	11	539	02-27-2020, 04:33 AM Last Post: Southwend
	Tank knee pads	Greg_imp	46	2,088	07-07-2017, 01:09 AM Last Post: Retsel_imp
	Arrow slip on and TechSpec tank pads	cb4me?_imp	10	622	05-28-2017, 12:54 PM Last Post: Lord Popgun
	AirHawk Seat	White Dog_imp	13	555	07-25-2016, 12:37 PM Last Post: White Dog_imp
	Better Brake Pads	736cc_imp	2	214	05-04-2016, 03:47 AM Last Post: kmoney_imp
	Moriwaki Skid Pads	Retsel_imp	28	1,362	03-07-2016, 10:27 PM Last Post: Lord Popgun
	Airhawk 2	Johnboy_imp	9	633	05-09-2015, 11:41 AM Last Post: Johnboy_imp

Threaded Mode Airhawk Seat pads
Author	Message