Login

DBM_imp · 08-31-2018, 06:43 AM

I want to gear up to lower the rpm at 70 mph. Rather than add a tooth on the front, l was thinking about swapping the rear with a 3 tooth smaller sprocket. Has anyone tried this? What is the stock gearing on a 2014 standard?

LongRanger_imp · 08-31-2018, 08:34 AM

Stock gearing is:

2013: 39/18 (2.166)
2014: 40/18 (2.222)
2017: 40/18 (2.222)

DBM_imp · 08-31-2018, 10:54 PM

(08-31-2018, 08:34 AM)LongRanger_imp Wrote: Stock gearing is:

2013: 39/18 (2.166)
2014: 40/18 (2.222)
2017: 40/18 (2.222)

Thank you. I'm not able to find any smaller rear sprockets online other than the OEM 39. Anyone know where l can get a 19 front?

**Cormanus** · 09-01-2018, 02:37 PM

Have you read this thread, DBM? http://cb1100forum.com/forum/showthread.php?tid=7304 ?

pekingduck · 09-03-2018, 11:41 AM

(08-31-2018, 10:54 PM)DBM_imp Wrote:
(08-31-2018, 08:34 AM)LongRanger_imp Wrote: Stock gearing is:

2013: 39/18 (2.166)
2014: 40/18 (2.222)
2017: 40/18 (2.222)
Thank you. I'm not able to find any smaller rear sprockets online other than the OEM 39. Anyone know where l can get a 19 front?

Thank you. I'm not able to find any smaller rear sprockets online other than the OEM 39. Anyone know where l can get a 19 front?
You might also try this thread. It's a little less long-winded:

http://cb1100forum.com/forum/showthread.php?tid=3378

Remember that 2014 & 2017 6-speed models have different internal gearing - both 5th and 6th are overdrives compared to a 2013. If you decide to go with a smaller rear, aluminum sprockets are available, but they will wear out much quicker.

pekingduck · 09-04-2018, 06:19 AM

(09-04-2018, 05:57 AM)m in sc_imp Wrote: contact these guys, they will make any sprocket you want, and they do it in house. I had them do a crazy offset one with a custom carrier for my rd in an odd chain pitch and was surprisingly cheap. a smaller oem style CB one should be no problem.

http://www.rebelgears.com/ call em, talk to them.

Hate to say, but they were one of the people I called, and they wouldn't do one in steel, just aluminum.

PowerDubs_imp · 09-04-2018, 07:04 AM

I'd just add a tooth to the front sprocket. No downside like a smaller front has.

But if you want to keep looking for cross reference for different bikes, maybe this will help-

http://www.jtsprockets.com/catalogue/sprocket/JTR302/

DBM_imp · 09-05-2018, 07:00 AM

Thank you all for the replies. Where can l buy a 19 front?
Ok. Found it on PBI.com.

CTsCB_imp · 09-05-2018, 06:54 PM

I have both brand new steel sprockets - 19T front and 37T rear for sale if anyone is interested.

Cheers

jimgl3_imp · 08-13-2019, 09:17 PM

will that 37 fit a 2014 and how much shipped to USA?

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Smaller turn signal/running light choices	TxRonHarris_imp	33	2,449	07-06-2021, 10:00 PM Last Post: mvk24_imp
	best sprocket swap for city commuter acceleration...	boynton6spd_imp	3	335	12-04-2020, 12:35 PM Last Post: 17-CB-002
	Rear Sprocket Nuts	89gaz89_imp	3	344	05-02-2020, 07:35 AM Last Post: pekingduck
	19 tooth countershaft sprocket	physics-teacher_imp	19	1,387	12-13-2019, 09:41 PM Last Post: marel_imp
	WANTED - 19T Front Sprocket	CTsCB_imp	0	227	07-24-2017, 03:52 PM Last Post: CTsCB_imp
	Carbon Fiber Sprocket Cover Anyone?	aschem_imp	7	502	09-22-2016, 11:34 PM Last Post: Elipten_imp
	Samurider front sprocket cover	Steverino_imp	6	548	01-12-2016, 02:10 PM Last Post: Ron in MO_imp
	19T PBI Sprocket	redbirds_imp	6	462	01-07-2016, 10:40 AM Last Post: redbirds_imp
	Samurider Sprocket Guard	Hedge_imp	4	434	05-04-2015, 09:43 PM Last Post: Hedge_imp
	Givi Rear Rack vs. Honda OEM Rear Carrier	lagoje_imp	29	1,663	04-24-2015, 06:03 AM Last Post: specialist8

Threaded Mode Smaller rear sprocket?
Author	Message