Login

Bheezy27403_imp · 02-21-2020, 09:57 AM

[Image: d9b84b06e8ded769e49ed3403d553cc6.jpg]

[Image: 656112b11cbf46f57585fc125df9c032.jpg]

[Image: c8cfe2d1edf5d1859351e885de5b2ecb.jpg]

Finished up last night. I haven't given in to the fact I need glasses (not my eyes it's just my arms aren't long enough) so it's not perfect but it'll do. If the enamel paint holds up it'll stay this way. If not, I will spray it black like it was originally.

Thanks to those that have done this mod and posted it up. I think it really classes up the cockpit.

E11even_Hunnit · 02-21-2020, 10:43 AM

So it's a direct Bolt on?
If so what year/cc Nighthawk

Bheezy27403_imp · 02-21-2020, 11:01 AM

Mine came off an 85 450

the Ferret · 02-21-2020, 11:22 AM

Looks good Bheezy... i thought it looked good polished too though

Bheezy27403_imp · 02-21-2020, 11:31 AM

Thanks. Wanted it to "pop" a little. We'll see how I get along with it when I get it installed tomorrow.

GoldOxide_imp · 02-21-2020, 01:16 PM

Nice example of "re-use" Bheezy. Thumbs Up

You are doing your part in saving the environment.

Bheezy27403_imp · 02-21-2020, 01:20 PM

I just ripped the idea off from another member or two. That's me, I'm Mr Green. Rolleyes

17-CB-002 · 02-21-2020, 04:04 PM

(02-21-2020, 09:57 AM)Bheezy27403_imp Wrote:

Finished up last night. I haven't given in to the fact I need glasses (not my eyes it's just my arms aren't long enough) so it's not perfect but it'll do. If the enamel paint holds up it'll stay this way. If not, I will spray it black like it was originally.

Thanks to those that have done this mod and posted it up. I think it really classes up the cockpit.

Mine, the lettering is the opposite compared to yours.
I think "mtneers" left his clamp original (black) - no polishing.

Mtneers · 02-21-2020, 10:18 PM

Mine was in pretty good shape. I looked at several before I found this one. [Image: 56cf32d444a7479345c86cc07e4c523f.jpg]

Sent from my iPad using Tapatalk

Bheezy27403_imp · 02-22-2020, 12:51 AM

The top yoke on my '13 is not painted so that's the reason I went with the bare look. I have changed my levers to black and have a tinted screen on my Road Comet so I think the black would work too.
Mtneers, with the black top yoke that clamp looks factory. Very nice. Same with yours Mr. Lee. It plays nicely with your cockpit. Thank you guys for the inspiration. It's always the subtle changes that YOU as the owner of a bike notice the most to make it yours.

PS Hopefully Huggie has our boys ready to play!

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Quad Lock handlebar vs clutch perch and bar-end mirrors	Uncle Sixer	1	230	01-04-2026, 01:26 PM Last Post: pekingduck
	Handlebar control symmetry	Uncle Sixer	17	1,225	08-07-2025, 05:24 AM Last Post: Cormanus
	Handlebar Risers??	bubblerboy64_imp	16	1,077	07-16-2022, 06:04 AM Last Post: calipo223_imp
	What to do with the handlebar mounts when converting to clip-on controls?	misterprofessionality	7	497	04-08-2022, 03:41 AM Last Post: misterprofessionality
	CB 1100 EX Handlebar original or other?	MALACAY_imp	4	398	04-03-2022, 01:00 AM Last Post: Cormanus
	Handlebar from 919	motorider6_imp	10	665	05-27-2021, 12:47 PM Last Post: Stichill_imp
	CRF1000 handlebar	mspaansnl_imp	0	169	05-25-2021, 04:57 AM Last Post: mspaansnl_imp
	USB ON HANDLEBAR - connection at battery direct .	Alfgaxatico_imp	32	1,642	01-20-2021, 10:42 PM Last Post: GoldOxide_imp
	HANDLEBAR RISERS - is really necessary???	Alfgaxatico_imp	19	1,044	12-16-2020, 10:40 PM Last Post: GoldOxide_imp
	Early 80’s handlebar clamp	PowerDubs_imp	33	1,525	10-10-2020, 02:36 AM Last Post: Gordo_imp

Threaded Mode Nighthawk handlebar top clamp
Author	Message