Finally making some progress.............

[jtopiso_imp]

[url=https://postimg.cc/hJrd4s8X] This is my 750K I bought new,this is how we built them years ago.
[url=https://postimg.cc/Nyj7XrPy]
Grandma Wells liked it. My plans for a pipe are hollowed out cat,polish the stock header pipes then make a slip on to make it look like the Kerker header on my old 750.

Did you lower the back of the bike? Shorter shocks? Or is it just the fender that is giving the super low look?

The rears been lowered a about 4 inches with custom made RACETECH shocks.

4 inches!!!

You are going ot need very smooth roads from now on, don't you?

[FLYTYM_imp]

[url=https://postimg.cc/hJrd4s8X] This is my 750K I bought new,this is how we built them years ago.
[url=https://postimg.cc/Nyj7XrPy]
Grandma Wells liked it. My plans for a pipe are hollowed out cat,polish the stock header pipes then make a slip on to make it look like the Kerker header on my old 750.

Did you lower the back of the bike? Shorter shocks? Or is it just the fender that is giving the super low look?

The rears been lowered a about 4 inches with custom made RACETECH shocks.

4 inches!!!

You are going ot need very smooth roads from now on, don't you?

4 inches!!!
No problem for me.
You are going ot need very smooth roads from now on, don't you?

[FLYTYM_imp]

Wow, that's great work. For the rear fender, did you modify the stock piece, or work with another fender to make it fit the CB? Can you do a closer shot of the line of the rear fender around the rear wheel?

[Gone in 60]

That's some smooth metal work! And quite a tuck on that wheel. The newly shaped taillight housing is a good match for that fender. It goes together nicely from a visual standpoint.

[FLYTYM_imp]

I still need the reshape the radius a little towards the front and thinking about making a fiberglass extension to bring to front of the fender down about 6 inches.

[FLYTYM_imp]

Front fender,surprised it went on as easy as it did. Just need to finalize the brackets.

[the Ferret]

That's a good looking fender

[jedd_imp]

that front fender does look good....reminds me of the one on my former '83 cb1100f w/ that upswept air foil to kick air onto the oil cooler.

[peterbaron]

Agree with posts #17 & 18

[FLYTYM_imp]

that front fender does look good....reminds me of the one on my former '83 cb1100f w/ that upswept air foil to kick air onto the oil cooler.

That's where it's from,I've had it for years saving it for a future project.