Login

The Gecko_imp · 07-09-2023, 06:13 AM

(06-05-2023, 11:03 PM)Cormanus_imp Wrote: I’d be interested in a report on the knock-off if anyone gets one.

Changed my mind, and ordered it on Thursday. So your report is coming soon Wink

**Cormanus** · 07-09-2023, 08:43 AM

mvk24_imp · 07-09-2023, 10:40 AM

(07-09-2023, 06:13 AM)The Gecko_imp Wrote:
(06-05-2023, 11:03 PM)Cormanus_imp Wrote: I’d be interested in a report on the knock-off if anyone gets one.

Changed my mind, and ordered it on Thursday. So your report is coming soon

Changed my mind, and ordered it on Thursday. So your report is coming soon Wink

I'll be on standby Gecko, if you like it ill get one from aliexpress also lol

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

The Gecko_imp · 07-11-2023, 01:24 AM

It's not called Kaoko, but a noname brand from China. Anyway it arrived today and installation was done in 2 minutes. In the garage it works better than expected. Why ? I had concerns that it might block the throttle if not adjusted carefully (with obvious consequences). But it doesn't. A few half turns backwards, and the throttle doesn't return into idle position, but at the slightest movement of your fingers throttle and control wheel do return. Good enough, safe enough. So far I like it better than the plastic tongue I tried last year.

pic1 shows the package contents (none is needed for the CB other than the control nob). It is best mounted with the original screw, and a supplied rubber ring.

pic2 shows the two "weights" side by side, they do not match in size as you can see, but the weight is similar. So that should be taken care of.

pic3 shows the mounted controller (not my best shot I know). Don't worry about the size, at this angle and distance it looks enormous. That why I added pic2. The color doesn't confront me - didn't want to wait for red (from China). And I can always go back to the beautiful silver original in under 2 minutes.

Will be 2-3 days before I get a chance to ride with it and tell you more. Rolleyes

peterbaron · 07-11-2023, 01:41 AM

Nice EX

mvk24_imp · 07-11-2023, 01:54 AM

(07-11-2023, 01:24 AM)The Gecko_imp Wrote: It's not called Kaoko, but a noname brand from China. Anyway it arrived today and installation was done in 2 minutes. In the garage it works better than expected. Why ? I had concerns that it might block the throttle if not adjusted carefully (with obvious consequences). But it doesn't. A few half turns backwards, and the throttle doesn't return into idle position, but at the slightest movement of your fingers throttle and control wheel do return. Good enough, safe enough. So far I like it better than the plastic tongue I tried last year.

pic1 shows the package contents (none is needed for the CB other than the control nob). It is best mounted with the original screw, and a supplied rubber ring.

pic2 shows the two "weights" side by side, they do not match in size as you can see, but the weight is similar. So that should be taken care of.

pic3 shows the mounted controller (not my best shot I know). Don't worry about the size, at this angle and distance it looks enormous. That why I added pic2. The color doesn't confront me - didn't want to wait for red (from China). And I can always go back to the beautiful silver original in under 2 minutes.

Will be 2-3 days before I get a chance to ride with it and tell you more.

Awesome, let us know how it works after some riding please!

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

GoldOxide_imp · 07-11-2023, 02:09 AM

Good start Gecko.

Anything might be better than "plastic gadget workaround" alternatives.

the Ferret · 07-11-2023, 03:42 AM

(07-11-2023, 01:24 AM)The Gecko_imp Wrote: It's not called Kaoko, but a noname brand from China. Anyway it arrived today and installation was done in 2 minutes. In the garage it works better than expected. Why ? I had concerns that it might block the throttle if not adjusted carefully (with obvious consequences). But it doesn't. A few half turns backwards, and the throttle doesn't return into idle position, but at the slightest movement of your fingers throttle and control wheel do return. Good enough, safe enough. So far I like it better than the plastic tongue I tried last year.

pic1 shows the package contents (none is needed for the CB other than the control nob). It is best mounted with the original screw, and a supplied rubber ring.

pic2 shows the two "weights" side by side, they do not match in size as you can see, but the weight is similar. So that should be taken care of.

pic3 shows the mounted controller (not my best shot I know). Don't worry about the size, at this angle and distance it looks enormous. That why I added pic2. The color doesn't confront me - didn't want to wait for red (from China). And I can always go back to the beautiful silver original in under 2 minutes.

Will be 2-3 days before I get a chance to ride with it and tell you more.

Please post up a link to where you got it for those interested

mvk24_imp · 07-11-2023, 03:51 AM

(07-11-2023, 03:42 AM)The ferret_imp Wrote:
(07-11-2023, 01:24 AM)The Gecko_imp Wrote: It's not called Kaoko, but a noname brand from China. Anyway it arrived today and installation was done in 2 minutes. In the garage it works better than expected. Why ? I had concerns that it might block the throttle if not adjusted carefully (with obvious consequences). But it doesn't. A few half turns backwards, and the throttle doesn't return into idle position, but at the slightest movement of your fingers throttle and control wheel do return. Good enough, safe enough. So far I like it better than the plastic tongue I tried last year.

pic1 shows the package contents (none is needed for the CB other than the control nob). It is best mounted with the original screw, and a supplied rubber ring.

pic2 shows the two "weights" side by side, they do not match in size as you can see, but the weight is similar. So that should be taken care of.

pic3 shows the mounted controller (not my best shot I know). Don't worry about the size, at this angle and distance it looks enormous. That why I added pic2. The color doesn't confront me - didn't want to wait for red (from China). And I can always go back to the beautiful silver original in under 2 minutes.

Will be 2-3 days before I get a chance to ride with it and tell you more.

Please post up a link to where you got it for those interested

Please post up a link to where you got it for those interested It looked like the one I posted above from Aliexpress but I could be wrong

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

the Ferret · 07-11-2023, 05:00 AM

That looks different to me compared to the one you posted in post 15

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Handlebar control symmetry	Uncle Sixer	17	1,394	08-07-2025, 05:24 AM Last Post: Cormanus
	What cruise control are you using for your CB1100?	goldeneye_imp	51	2,714	11-16-2023, 12:26 PM Last Post: GoldOxide_imp
	KAOKO cruize control	ozigoo	6	431	05-27-2020, 01:14 PM Last Post: 17-CB-002
	CBR RR throttle bodies	TrickyNicky089_imp	29	1,944	08-13-2018, 06:26 PM Last Post: Bradders_imp
	That ugly round blank on the throttle body	the_undecider_imp	85	4,418	01-12-2018, 08:29 AM Last Post: clearviewx
	Foot Control Relocation Kit	reinie_imp	6	478	01-10-2018, 12:13 PM Last Post: Nightengale_imp
	Kaoko Cruise Control Kit	17-CB-002	12	668	07-19-2017, 02:10 PM Last Post: Nortoon_imp
	Quick Turn Throttle	olekzap_imp	15	1,086	08-24-2016, 10:02 AM Last Post: Ulvetanna_imp
	I got booted out of Twisted Throttle	Chapomis_imp	13	1,000	04-14-2016, 09:35 PM Last Post: Chapomis_imp
	Brake Away throttle control	Razor	25	1,321	07-16-2015, 10:05 PM Last Post: redbirds_imp

Threaded Mode Anyone using the Kaoko throttle control?
Author	Message