+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Anyone using the Kaoko throttle control? (/showthread.php?tid=7950)
Anyone using the Kaoko throttle control? - milkmaster_imp - 06-03-2023
Anyone using the Kaoko throttle lock on their CB1100? If so, care to share your positives and negative experiences?
RE: Anyone using the Kaoko throttle control? - GoldOxide_imp - 06-03-2023
I didn't use one on the Honda CB1100, but I am on the Honda CRF1000.
For a throttle lock, its greatest strength is its ability to regulate throttle response. That is, if you are going over rough roads and your throttle arm/wrist is bouncing around, it can smooth out the control.
As for a lock, it works well. I feel it is reliable. It is also well-crafted and blends in very nicely with the design of the bike.
= = =
On the other hand, it is no substitute for proper cruise control. However, it was not meant to be. In addition, it takes a bit to get used to. It might be one of those farkles either you like or dislike.
RE: Anyone using the Kaoko throttle control? - milkmaster_imp - 06-03-2023
Thanks yes I agree it is no substitute. Sometimes you just need to lock the throttle for a minute when something itches or as you say stiffen it up a bit on a rough road.
The Kaoko is a little pricey, looks well done. THX(06-03-2023, 06:56 AM)GoldOxide_imp Wrote: I didn't use one on the Honda CB1100, but I am on the Honda CRF1000.
For a throttle lock, its greatest strength is its ability to regulate throttle response. That is, if you are going over rough roads and your throttle arm/wrist is bouncing around, it can smooth out the control.
As for a lock, it works well. I feel it is reliable. It is also well-crafted and blends in very nicely with the design of the bike.
= = =
On the other hand, it is no substitute for proper cruise control. However, it was not meant to be. In addition, it takes a bit to get used to. It might be one of those farkles either you like or dislike.
RE: Anyone using the Kaoko throttle control? - Cormanus - 06-03-2023
Milkmaster, have a search on the forum. Others have used them in the past.
For example http://cb1100forum.com/forum/showthread.php?tid=15542
RE: Anyone using the Kaoko throttle control? - 1973cb750 - 06-03-2023
i have one threw it in the trash junk it was threaded in wrong direction the throttle returning to close would unlock itself
Anyone using the Kaoko throttle control? - mvk24_imp - 06-05-2023
Looks cool, im not sure how that works though ill have to watch a video.
How much do those cost?
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
RE: Anyone using the Kaoko throttle control? - GoldOxide_imp - 06-05-2023
The basic function is turn the ring to stiffen or lock the throttle from turning. It causes the shaft to "expand" creating a friction surface inside the handlebar that impedes throttle rotation.
Undo the turning to loosen or unlock the throttle to resume normal freeform throttle behaviour.
RE: Anyone using the Kaoko throttle control? - mvk24_imp - 06-05-2023
(06-05-2023, 02:35 AM)GoldOxide_imp Wrote: The basic function is turn the ring to stiffen or lock the throttle from turning. It causes the shaft to "expand" creating a friction surface inside the handlebar that impedes throttle rotation.O that sounds better than the cheap palm press style ones. Whenever I'd hit a bump I'd "blip" the throttle. Didn't like that at all and stopped using it by the end of the first day of a trip I got it for.
Undo the turning to loosen or unlock the throttle to resume normal freeform throttle behaviour.
I would give this style a whirl. Maybe I'll try the aliexpress version for 32$
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
RE: Anyone using the Kaoko throttle control? - 1973cb750 - 06-05-2023
(06-05-2023, 02:35 AM)GoldOxide_imp Wrote: The basic function is turn the ring to stiffen or lock the throttle from turning. It causes the shaft to "expand" creating a friction surface inside the handlebar that impedes throttle rotation.
Undo the turning to loosen or unlock the throttle to resume normal freeform throttle behaviour.
mine would just unscrew and not hold anything
RE: Anyone using the Kaoko throttle control? - mvk24_imp - 06-05-2023
(06-05-2023, 04:59 AM)1973cb750_imp Wrote:(06-05-2023, 02:35 AM)GoldOxide_imp Wrote: The basic function is turn the ring to stiffen or lock the throttle from turning. It causes the shaft to "expand" creating a friction surface inside the handlebar that impedes throttle rotation.
Undo the turning to loosen or unlock the throttle to resume normal freeform throttle behaviour.
mine would just unscrew and not hold anything
mine would just unscrew and not hold anything Thank sounds @~*^ty, not the kind of thing you can use locktite in either I suppose.
Probably doesn't help that you're removing a bar end weights to install it either. Im sure the vibrations can contribute to it loosening
2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca