Posts: 1
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2013
I am planning to install a GPS and found a spare wire in the harness (red connector with a black cap) next to the battery but not sure where I could get the connector for it or if someone has a idea where I could tap power for the GPS
Posts: 124
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Mar 2013
I believe that may be reserved for the heated grips sub harness.
Posts: 8,035
Threads: 21
Likes Received: 186 in 108 posts
Likes Given: 136
Joined: Apr 2025
Or a diagnostic connector? Ill see if I can find it on the wiring diagram later.
Posts: 23,466
Threads: 697
Likes Received: 572 in 258 posts
Likes Given: 750
Joined: Apr 2025
I run the GPS on my ST thru the connecter on my battery tender
Posts: 8,035
Threads: 21
Likes Received: 186 in 108 posts
Likes Given: 136
Joined: Apr 2025
Its not the diag. connector (DLC). That one has 4 wires and is behind the left side panel.
Looking at the cable layout drawing shows there are 2 option connectors. One is in the headlight shell and the other is by the battery in a connector boot.
The connectors are labeled in the book as "OPTION 2P (Red) CONNECTOR.
Hope that helps!
Posts: 25
Threads: 5
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2013
(05-12-2013, 01:43 AM)Lord Popgun_imp Wrote: Its not the diag. connector (DLC). That one has 4 wires and is behind the left side panel.
Looking at the cable layout drawing shows there are 2 option connectors. One is in the headlight shell and the other is by the battery in a connector boot.
The connectors are labeled in the book as "OPTION 2P (Red) CONNECTOR.
Hope that helps!
Popgun, does that optional red headlight connector have a brown/black and a green wire gng to it? Trying to pick up 12 volts without running wires back to battery for cig/accessory adapter.
Posts: 8,035
Threads: 21
Likes Received: 186 in 108 posts
Likes Given: 136
Joined: Apr 2025
I am not by my manual, but I believe that is the color scheme. Its the only unused connector in there and has a cap or plug or whatever for protection. I'll check the diagram when I get home.
Posts: 25
Threads: 5
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2013
(06-13-2013, 03:23 AM)Lord Popgun_imp Wrote: I am not by my manual, but I believe that is the color scheme. Its the only unused connector in there and has a cap or plug or whatever for protection. I'll check the diagram when I get home.
Ok, thanks. I'm having trouble getting the red cap off to take a voltage reading. 3 little dimples apparently need to be depressed to remove cap.
Posts: 8,035
Threads: 21
Likes Received: 186 in 108 posts
Likes Given: 136
Joined: Apr 2025
Ok, thats it.
Green is ground and black/brown is hot.
Posts: 25
Threads: 5
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2013
(06-13-2013, 08:22 AM)Lord Popgun_imp Wrote: Ok, thats it.
Green is ground and black/brown is hot.
Thanks for the help.