Posts: 6
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2018
Sad news...
1200 miles into my brand new bike, and my tire went haywire and popped which caused me to severely damage my rim/wheel. I’m not sure how tire popped, as the damage was done where it connects to the rim, not the area that touches the ground. My dad thinks the tire was defective and I’m honestly not sure...
I ride the 2014 model and a new wheel and tire is roughly $700 so I’ve been searching EBay for cheaper alternatives.
I did find two different rear wheel styles for the 2013 CB1100.
One is a straight 18x4 wheel and the other is a PCX150 14x2.15 14” straight wheel.
I was wondering if these would work.y
Posts: 7,101
Threads: 94
Likes Received: 588 in 322 posts
Likes Given: 995
Joined: Apr 2025
(08-12-2018, 09:45 AM)Valtorei_imp Wrote: Sad news...
1200 miles into my brand new bike, and my tire went haywire and popped which caused me to severely damage my rim/wheel. I’m not sure how tire popped, as the damage was done where it connects to the rim, not the area that touches the ground. My dad thinks the tire was defective and I’m honestly not sure...
I ride the 2014 model and a new wheel and tire is roughly $700 so I’ve been searching EBay for cheaper alternatives.
I did find two different rear wheel styles for the 2013 CB1100.
One is a straight 18x4 wheel and the other is a PCX150 14x2.15 14” straight wheel.
I was wondering if these would work.y
If it were my bike, I would replace rear wheel with OEM and PR3
Make decision after others response.
Posts: 6
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2018
(08-12-2018, 09:53 AM)peterbaron_imp Wrote: (08-12-2018, 09:45 AM)Valtorei_imp Wrote: Sad news...
1200 miles into my brand new bike, and my tire went haywire and popped which caused me to severely damage my rim/wheel. I’m not sure how tire popped, as the damage was done where it connects to the rim, not the area that touches the ground. My dad thinks the tire was defective and I’m honestly not sure...
I ride the 2014 model and a new wheel and tire is roughly $700 so I’ve been searching EBay for cheaper alternatives.
I did find two different rear wheel styles for the 2013 CB1100.
One is a straight 18x4 wheel and the other is a PCX150 14x2.15 14” straight wheel.
I was wondering if these would work.y
If it were my bike, I would replace rear wheel with OEM and PR3
Make decision after others response.
If it were my bike, I would replace rear wheel with OEM and PR3
Make decision after others response. I’m still new to stuff like this... What’s a PR3?
Posts: 361
Threads: 4
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2013
There's only one OEM wheel for 2013/2014, and it's the 18x4. Not sure where you found the other wheel, but the PCX-150 is a small-wheeled scooter.
Furthermore, if you're not already aware, there's a color difference between the 2013 & 2014 CB1100 wheels.
Posts: 8,044
Threads: 21
Likes Received: 196 in 116 posts
Likes Given: 140
Joined: Apr 2025
A PCX150 is a Honda scooter. A scooter wheel isn’t going to work. Like Peterbarron said, get a OEM wheel.
PR3 is a Michelin Pilot Road 3 tire.
You can get a wheel for less than list. Here is just one place:
https://www.partsfish.com/oemparts/a/hon...rear-wheel
Posts: 7,101
Threads: 94
Likes Received: 588 in 322 posts
Likes Given: 995
Joined: Apr 2025
Valtorei,
Follow Popgun post # 5, you will not regret it.
Good luck
Posts: 6
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: May 2018
This is where I was looking for my OEM part and it was roughly $490 for the part I needed.
https://www.hondapartshouse.com/oemparts...rear-wheel
Posts: 8,044
Threads: 21
Likes Received: 196 in 116 posts
Likes Given: 140
Joined: Apr 2025
Yeah that’s a good site too.
Posts: 16,318
Threads: 348
Likes Received: 874 in 477 posts
Likes Given: 1,006
Joined: Apr 2025
Mate, it has the popgun seal of approval. Must be a beauty.
Posts: 8,044
Threads: 21
Likes Received: 196 in 116 posts
Likes Given: 140
Joined: Apr 2025
I’m not really a beauty

Oh wait,you meant the website