Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
early 80's style cb1100f signal conversion...hard?
#21
Mr. P, the OEM style connectores are readily available on the aftermarket. I have some. Give me a little while and I’ll post the link.
Reply
#22
Mr. P, here is the link: http://www.cycleterminal.com/hm-sealed-series-090.html

I think you want the 2 pin. Scroll down for it. I can’t remember right off hand as I haven’t had mine off for a long while. I’d go out in the garage for a look, but I’m out of town on the ST1300 for a little Labor day trip.
Reply
#23
that looks spot on popgun, great tip! I just have to lay hands on some wires speaker wire and get it all together.
Reply
#24
What about going to the auto shop and buying a roll of automotive electrial wire if you don't have any speaker wire lying around?
Reply
#25
Are those the ones marked "automotive primary wire?" i've seen some of those while I was out browsing today, but had no idea which one or which gauge I would need. I'm not the type of person to have any wire of any kind laying about, so i'm going to be buying something no matter what.
Reply
#26
Something like this https://www.supercheapauto.com.au/p/sca-...6707.html. Popgun or SportsterDoc or max or one of the other electrical gurus could advise the correct amperage.
Reply
#27
Doesn’t matter much. Look at how small the existing wires are- pretty much any scrap wire you have lying around will work fine.


Sent from my iPhone using Tapatalk
Reply
#28
Thanks to everybody's handholding, I've made a small bit of progress. behold, an aftermarket signal with a longer connector for the rear signal!

I'm still confused on the colors though. i've got green and orange on the connector side, and red, black, and black/white stripe on the signal side. near as I can tell, it's supposed to be red to orange, and green to black, and the black/white stripe line left hanging. I guess we'll find out when i try to put them on.

Also, I really do want to thank everybody for throwing me information here and there. I know this is baby stuff, but it's rocket science for somebody like me.
Reply
#29
Good job!

Did you check the blinker fluid level?


Sent from my iPhone using Tapatalk
Reply
#30
even i get that one.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rear indicator (Turn signal) relocation bracket 2013 model AndyBeeMD 15 1,093 08-16-2025, 05:01 PM
Last Post: bflint
  Question re: 2017EX spoke rims tubeless conversion slmjim n Z1BEBE_imp 6 347 10-28-2023, 09:24 PM
Last Post: slmjim n Z1BEBE_imp
  Pictures of OEM Rear turn signal mount Houndwheels_imp 8 520 09-12-2023, 10:28 AM
Last Post: Houndwheels_imp
  removing rear turn signal modmaster_imp 12 687 04-20-2023, 10:17 AM
Last Post: Lord Popgun
  Front brake lever ROCK hard ichiban_imp 37 2,441 02-10-2023, 10:54 PM
Last Post: Lord Popgun
  After market turn signal on CB 1100rs 2018 not working Saltani_imp 6 377 12-08-2022, 09:24 PM
Last Post: leung_imp
  Turn Signal Switch and Horn Button Locations pekingduck 26 1,234 07-12-2022, 08:04 PM
Last Post: tommymck_imp
  2013 turn signal replacement RF(OEM) casey66_imp 17 841 01-15-2022, 01:31 AM
Last Post: Bazbro_imp
  Will exhaust off the older CB1100F fit? boynton6spd_imp 2 165 06-09-2021, 07:13 AM
Last Post: Rox_imp
  Turn Signal Malfunction billyfinchapel_imp 5 374 05-04-2021, 01:51 PM
Last Post: billyfinchapel_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)