Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
PAIR valve hose connections
#1
After valve inspection I think I reconnected the right side incorrectly, after stumbling upon a parts fiche..

There are two hoses, I reconnected the long hose going to the air box to the rear most of the two, noticed it was really loose, going back on. It should go in to the front I believe.

Am I correct?

thanks
Reply
#2
Yep, just looked, the front goes to the airbox, rear one to the rh pair valve, they cross over each other.
Pair valve crosses on outside, airbox on the inside.

You are correct, they need to be swapped.
Reply
#3
(12-17-2018, 05:50 AM)max_imp Wrote: Yep, just looked, the front goes to the airbox, rear one to the rh pair valve, they cross over each other.
Pair valve crosses on outside, airbox on the inside.

You are correct, they need to be swapped.

Thanks for the time and confirmation.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Valve Adjustment and Camshaft Removal dave 5 349 03-21-2026, 04:49 PM
Last Post: Cormanus
  Valve Adjustment dave 6 571 08-29-2025, 10:46 AM
Last Post: dave
  Valve Cover Baffle lining ? bflint 6 659 07-26-2025, 11:27 AM
Last Post: bflint
  Valve Adjustment Intervals CBRider_imp 32 1,920 04-21-2025, 02:24 PM
Last Post: Jurlie_imp
  Valve Adjustment Tolerances - How Far Do You Go? dave 14 1,048 10-18-2023, 09:28 PM
Last Post: The Gecko_imp
  Observed Valve Clearance Cormanus 16 893 03-06-2023, 09:03 AM
Last Post: Tejas_imp
  The OBSERVED Valve Clearance thread Pterodactyl_imp 162 8,063 12-27-2022, 08:35 AM
Last Post: Cormanus
  Checking valve clearances Maturecheese_imp 74 3,783 12-11-2022, 12:56 PM
Last Post: GoldOxide_imp
  Valve noise (i think) Maturecheese_imp 6 406 07-08-2022, 03:41 AM
Last Post: 1973cb750
  valve adjustment jimgl3_imp 44 1,927 06-03-2021, 11:38 AM
Last Post: GoldOxide_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)