Wiring diagram for turn signals.

[deltamark]

Thanks popgun. Not sure if I missed something. I saw the pictures which pointed out the left turn signal and running light, but didn't see a link to a drawing.

Delta, see if this will work for you: http://cb1100forum.com/forum/showthread....#pid199015

Link to drawing toward end of post.

[Lord Popgun]

Click on the red word here where it says Click here for diagram

If thats not good let me know.

[Cormanus]

[url=https://i.imgur.com/IxWXkk3.jpg]Or click here.

[deltamark]

Got it! Thank you popgun and Cormanus!

[Lord Popgun]

[url=https://i.imgur.com/IxWXkk3.jpg]Or click here.

Thanks Cormanus

[Cormanus]

[domeular_imp]

Could someone please provide a photo of where the relay is on the 2013 CB1100 and what it looks like? I must be an idiot because I can find the right plug!

Thanks everyone.

[Lord Popgun]

Domeular,

Are you talking about the turn signal/position relay? Its under the gas tank. Wait a minute and check your PM. Well, I see that Bazbro posted while I was talking. Check your PM anyway.

[max]

You can find it under the fuel tank, it has 8 wires going to it, some orange and light blue ones and it sits beside another relay of sorts in a dedicated spot in front of the ecm.

The fuel connector etc. needs to be disconnected and the tank removed to gain access.

[domeular_imp]

Huge help, everyone! I was going nuts testing other plugs, etc. It is for the LED turn signals I installed. I'm planning on taking the tank off for paint in a few months. I'll do it then. I appreciate the quick responses.

You can find it under the fuel tank, it has 8 wires going to it, some orange and light blue ones and it sits beside another relay of sorts in a dedicated spot in front of the ecm.

The fuel connector etc. needs to be disconnected and the tank removed to gain access.