07-20-2020, 02:38 AM
I like induction sound when it sounds good. The TSR just made noise, no good note to it.
This is certainly much cheaper if you have a bit of time and a hole saw.
Like I said- you can literally just blow a hole in the left side of the airbox and filter and leave it wide open as it will filter the air the same as the normal right hand side of the airbox if you aren't concerned with noise but want more airflow.
Metric for results? No annoying sound when ridden...and the dyno will be revisted so I will probably swap between the '14 boot with vent as shown above and the TSR plate.
This is certainly much cheaper if you have a bit of time and a hole saw.
Like I said- you can literally just blow a hole in the left side of the airbox and filter and leave it wide open as it will filter the air the same as the normal right hand side of the airbox if you aren't concerned with noise but want more airflow.
Metric for results? No annoying sound when ridden...and the dyno will be revisted so I will probably swap between the '14 boot with vent as shown above and the TSR plate.