07-23-2020, 09:35 AM
I'll take a better pic of the flyscreen on the bike outside whenever I'm able to get it back outside, but here are some pics showing what the Dart Marlin flyscreen looks like on the 2017 EX model.
Relatively easy install. Required:
1. Removing front of headlight
2. Disconnecting turn signal plugs (R=blue, L=orange)
3. Removing both headlight side brackets
4. Removing both turn signals
Removing the headlight brackets was a little tricky--not much room to fit the allen wrench up there--at least on the right side due to the brake line.
The new headlight mounting brackets push the entire headlight unit forward about an inch, maybe inch and a quarter. I don't really notice it.
Relatively easy install. Required:
1. Removing front of headlight
2. Disconnecting turn signal plugs (R=blue, L=orange)
3. Removing both headlight side brackets
4. Removing both turn signals
Removing the headlight brackets was a little tricky--not much room to fit the allen wrench up there--at least on the right side due to the brake line.
The new headlight mounting brackets push the entire headlight unit forward about an inch, maybe inch and a quarter. I don't really notice it.