10-09-2020, 09:04 PM
Not sure if the color is a match but i had good results with duplicolour DE1615 aluminium on my cb550.
Just removed oil etc. with thinners and sprayed one layer over the half flaked off paint, this is 5 years later, the ceramic duplicolour is on the engine casing and the cylinder, the generator cover is clear laquer;
No special cure, i just rode the bike to a gentle heat as described in the instructions and repeated at hotter temps a few times, i found it adheres very well just without primer;
You may want to use a brush or mask the area, practice on something else first and the paint stays soft until it has been baked
Just removed oil etc. with thinners and sprayed one layer over the half flaked off paint, this is 5 years later, the ceramic duplicolour is on the engine casing and the cylinder, the generator cover is clear laquer;
No special cure, i just rode the bike to a gentle heat as described in the instructions and repeated at hotter temps a few times, i found it adheres very well just without primer;
You may want to use a brush or mask the area, practice on something else first and the paint stays soft until it has been baked