04-24-2021, 09:17 PM
I would just feel more comfortable about it if I've seen it done. watch one, do one, teach one, you know... there is at least one video on the nc750x and it's so simple you could adjust them occasionally for fun. really.
re: it being same as other shim under bucket, yes, but I want to see that valve cover come off and all those little pieces and parts that LakeWylieJoe talks about in his tips post.
and with the nc there are T1 and T2 marks you can clearly see so it's pretty much dummy proof where to line up. where as with this monster, you may have to take sprockets and chains off which scares the pee out of me!
I'm over 20,000 miles, so probably a good idea to check before too much longer...
re: it being same as other shim under bucket, yes, but I want to see that valve cover come off and all those little pieces and parts that LakeWylieJoe talks about in his tips post.
and with the nc there are T1 and T2 marks you can clearly see so it's pretty much dummy proof where to line up. where as with this monster, you may have to take sprockets and chains off which scares the pee out of me!
I'm over 20,000 miles, so probably a good idea to check before too much longer...