11-26-2021, 02:11 PM
Changed the front tire today, all went well, cable ties went good, tire direction on the wheel was fine, the bead set ok at 2.5 bar, bushes installed on the correct side, lube on the seals and shaft and everything mounted perfectly except.........
Breaking the bead, very easy and quick,
don't worry, the rim was supported, this is just a mock-up to show how it's done;
The brakes were dragging, they never drag; what went wrong
Balancing the wheel by using an alu rod, the tire settles as i rotate the rod left and right, nothing fancy and it works,
The stand is a home made paddock stand for my cb919 hornet;
Answer tomorrow
Breaking the bead, very easy and quick,
don't worry, the rim was supported, this is just a mock-up to show how it's done;
The brakes were dragging, they never drag; what went wrong
Balancing the wheel by using an alu rod, the tire settles as i rotate the rod left and right, nothing fancy and it works,
The stand is a home made paddock stand for my cb919 hornet;
Answer tomorrow