07-18-2020, 08:06 AM
I've found multiple sources of info here on the accessory plugs for before '17 models, but not able to find much about the '17 model. So, here's some info and also a question.
The 2-pin (Bl/Br) red plug in the headlight area seems to be the same for the '17 model.
Need to order the 2-pin male side if you want to do a clean plug install. Available [url=http://www.cycleterminal.com/hm-sealed-series-090.html]here as are the necessary pins.
The under-seat accessory plug on the '17 model is different than the other years. First, it's a 4-pin plug (Gr/Y, R/G, G, Bl/Br). Second, it's not in the same protective boot as the rear turn signals/tail light connectors.
It's in the protective boot on the left side with the brown battery connector.
4-pin male connector/pins can be ordered [url=http://www.cycleterminal.com/hm-sealed-series-090.html]here.
Here's my question. I believe the Bl/Br and G are hot/ground, but what are the other two (Gr/Y, R/G) wires for in this accessory plug? I only need the hot/ground and the plug itself should be switched, so can I just ignore those other two leads?
The 2-pin (Bl/Br) red plug in the headlight area seems to be the same for the '17 model.
Need to order the 2-pin male side if you want to do a clean plug install. Available [url=http://www.cycleterminal.com/hm-sealed-series-090.html]here as are the necessary pins.
The under-seat accessory plug on the '17 model is different than the other years. First, it's a 4-pin plug (Gr/Y, R/G, G, Bl/Br). Second, it's not in the same protective boot as the rear turn signals/tail light connectors.
It's in the protective boot on the left side with the brown battery connector.
4-pin male connector/pins can be ordered [url=http://www.cycleterminal.com/hm-sealed-series-090.html]here.
Here's my question. I believe the Bl/Br and G are hot/ground, but what are the other two (Gr/Y, R/G) wires for in this accessory plug? I only need the hot/ground and the plug itself should be switched, so can I just ignore those other two leads?