07-18-2023, 08:53 AM
Gecko,
I see in the first post that you have a service manual. I would suggest you look at section 15. That is the ABS section and tells you how to retrieve ABS fault codes from the ABS modulator’s ECU.
You do it by shorting 2 pins on the ABS service check connector and the ABS light will flash the code. There should be a code as the light has been coming on. Follow the procedure RETRIEVAL/ERASURE OF PROBLEM CODE. There is a picture of the connector with a jumper wire installed. I can’t tell you exactly where the connector is as I do not have ABS.
I would start here instead of just guessing and poking around. Just my $0.02.
I see in the first post that you have a service manual. I would suggest you look at section 15. That is the ABS section and tells you how to retrieve ABS fault codes from the ABS modulator’s ECU.
You do it by shorting 2 pins on the ABS service check connector and the ABS light will flash the code. There should be a code as the light has been coming on. Follow the procedure RETRIEVAL/ERASURE OF PROBLEM CODE. There is a picture of the connector with a jumper wire installed. I can’t tell you exactly where the connector is as I do not have ABS.
I would start here instead of just guessing and poking around. Just my $0.02.