Hibeam and hibeam flash button acting up.

[Jgarciajr40_imp]

I did a thread about this I think a year ago. I ended up opening it up and greasing the contacts on the hi/lo switch and that seemed to fix my issue.

Well, the issue has come up again. But this time it includes the “flash” button.

Out of curiosity does anyone have a schematic to the light switch, or just a dimenstration on how the light switch works? I was thinking of taking it apart again and putting dielectric grease where needed.

Also, a side question. How difficult is it to simply swap the switch assembly? I see a small square computer style going from the switch into the bike underneath the brake fluid reservoir. Does that simply unplug, or am I looking at an annoying job where the switch wire has to be routed all the way down the frame of the bike?
Here’s a photo I couldn’t upload due to file size so here’s some random third party think of the photo.

Does the switch simply plug into this black square?



I believe I’m having these issues because I ride 365 rain, sleet, or snow. Albeit no snow in Florida.
I believe this is the part number, and anyone able to verify?

[url=https://www.partzilla.com/product/honda/35200-MGC-JB2]https://www.partzilla.com/product/honda/35200-MGC-JB2